Getting data off the bare drive of a mac HFS formatted hard drive
Helping a friend with this - they have a mac with WD external 'for mac' USB hard drive. The mini ubs connector got wrecked 'somehow' and I thought it would be a cinch to take the bare drive out, connect it to a USB to SATA adapter I have and copy data to a new USB hard drive they have.
I started with a windows PC with several different HFS drivers installed / uninstalled. Connecting the new 'for mac' hard drive in the windows PC, it sees 2 partitions - a 'cd drive' partition with apps, instructions, etc. and another HFS formatted empty hard drive. so the hfs drivers would appear to work (I uninstalled / installed new drivers over the last few days seeing if 1 was better than another. and I have 2 different USB / SATA adapters and tried them also).
Through all that, the win PC saw that old bare drive as an unknown partition. I connected the drive to a Mac and got 'this drive is unrecognizable' message and chose ignore, NOT initialize.
I tried several windows apps trying to get data back, including RAISE, which is specific for HFS? at best they found some files, likely the ones that would be on the CD drive part of the drive.
I then connected the drive to a mac and ran the trial of data rescue 3. Same thing - just a few files, not the hundreds of mp3s that should be on there.
I want to try diskwarrior on the mac, but there doesn't seem to be a trial?!
Any thoughts on what else to try? Frustrating that the drive spins, no clunking, data rescue testing shows the drive is OK physically, but no data from any of these apps : (
I started with a windows PC with several different HFS drivers installed / uninstalled. Connecting the new 'for mac' hard drive in the windows PC, it sees 2 partitions - a 'cd drive' partition with apps, instructions, etc. and another HFS formatted empty hard drive. so the hfs drivers would appear to work (I uninstalled / installed new drivers over the last few days seeing if 1 was better than another. and I have 2 different USB / SATA adapters and tried them also).
Through all that, the win PC saw that old bare drive as an unknown partition. I connected the drive to a Mac and got 'this drive is unrecognizable' message and chose ignore, NOT initialize.
I tried several windows apps trying to get data back, including RAISE, which is specific for HFS? at best they found some files, likely the ones that would be on the CD drive part of the drive.
I then connected the drive to a mac and ran the trial of data rescue 3. Same thing - just a few files, not the hundreds of mp3s that should be on there.
I want to try diskwarrior on the mac, but there doesn't seem to be a trial?!
Any thoughts on what else to try? Frustrating that the drive spins, no clunking, data rescue testing shows the drive is OK physically, but no data from any of these apps : (
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
nox: No encryption that I know about. music was on it. 2 partitions I would think - the Utiliity partition that would show up as a CD and then the HFS partition, like on the new hard drive.
found this: http://forums.macrumors.com/showthread.php?t=1372324
I guy's WD external hard drive's USB connector broke and all the data was lost.
found this: http://forums.macrumors.com/showthread.php?t=1372324
I guy's WD external hard drive's USB connector broke and all the data was lost.
Ok what is the size of the drive? And which drivers did you use specifically?
it's a 2 gb drive. and now we're on the mac using drive warrior 4.4.
it calls this an unknown drive
'directory cannot be rebuilt, the size of this standard disk is unsupported.
it calls this an unknown drive
'directory cannot be rebuilt, the size of this standard disk is unsupported.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
brand / model - it's a roswill unit. I have another usb-sata that the physical drive isn't seen at all. this one at least sees the drive. I only have mac laptops. even with imacs - can you add a 2nd sata drive? Everything is so compact.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
2TB or 2GB? I doubt you want to pay for music recovery. Have you tired Paragon HFS for Windows to get access to the drive in Windows and connecting the drive directly to motherboard sata connector?
2TB sorry! yes, tried hfs, installed it right into a windows pc on a sata cable, still no luck.
I just envision someone else coming along with something and getting it to work. A mac with sata cable so the usb / sata adapter is out of the equation.
I took apart a USB 3 my book essentials I had to get to the internal usb / sata adapter. using that one, the mac said its an unrecognised drive, I chose ignore, then no apps saw the physical drive at all.
I just envision someone else coming along with something and getting it to work. A mac with sata cable so the usb / sata adapter is out of the equation.
I took apart a USB 3 my book essentials I had to get to the internal usb / sata adapter. using that one, the mac said its an unrecognised drive, I chose ignore, then no apps saw the physical drive at all.
Had you made a image copy onto a scratch drive or partition first, and worked with the clone and booted the Mac off the recovery CD then you could have used the native apple tools to safely put that data on another disk, or a drive on the network.
At this point only a pro with a binary editor and expensive software that has no free trials is the only way to go.
If data is worth $500+ then consider getting a free estimate from somebody who knows what they are doing. Otherwise, reformat and move on.