SQL Loader control file

Please find the log file attached.

I ran the sql loader like this.

$ sqlldr control = control.ctl data = data.txt log = data.log bad = data.bad discard = data.discard userid = $userid/$pass

SQL*Loader: Release 10.2.0.3.0 - Production on Fri Apr 10 15:38:57 2009

Copyright (c) 1982, 2005, Oracle.  All rights reserved.

Commit point reached - logical record count 10

Dude,

I dont think you are able to load in table1 too.

The data types in table and format in the file is not matching.  So is the error.

Tip:

Try loading only one record in one table till the data is successfully loaded in Table1.  Once you are set, you can load more records.

HTH

I apologize for that. I ftp'ed with ASCII format. Hence they were not loaded into table1
Please find the log file attached.

In a site, i found this information regarding loading into multiple tables. But, i do not use position delimiter. please suggest.

http://www.orafaq.com/wiki/SQL*Loader_FAQ

Loading into multiple tables
One can also specify multiple "INTO TABLE" clauses in the SQL*Loader control file to load into multiple tables. Look at the following example:  LOAD DATA
INFILE *
INTO TABLE tab1 WHEN tab = 'tab1'
  ( tab  FILLER CHAR(4),
    col1 INTEGER
  )
INTO TABLE tab2 WHEN tab = 'tab2'
  ( tab  FILLER POSITION(1:4),
    col1 INTEGER
  )
BEGINDATA
tab1|1
tab1|2
tab2|2
tab3|3

The "tab" field is marked as a FILLER as we don't want to load it.
Note the use of "POSITION" on the second routing value (tab = 'tab2'). By default field scanning doesn't start over from the beginning of the record for new INTO TABLE clauses. Instead, scanning continues where it left off. POSITION is needed to reset the pointer to the beginning of the record again.

corrected post

--instead of
INTO TABLE TABLE2 WHEN FILLERCOL = '2'
--can you try
INTO TABLE TABLE2 WHEN FILLERCOL <> '1'

                                              

1:
2:
3:
4:

@ajexpert:
it is still not loading into table2.

can u send  me the log file?

Please find the log file attached.

ok,

Lets try this.  Note both are inserting records into table1.

With this you should be able to load all 10 records in table1.

Let me know along with log file

--instead of
INTO TABLE TABLE1 WHEN FILLERCOL = '1'
--can you try
INTO TABLE TABLE1 WHEN FILLERCOL <> '1'
 
                                              

1:
2:
3:
4:
5:

Do you want me to write like this? Sorry about that, i was a little confused.
LOAD DATA
APPEND
INTO TABLE TABLE1 WHEN FILLERCOL <> '1'
FIELDS TERMINATED BY ',' TRAILING NULLCOLS
(
     COLUMN1           INTEGER EXTERNAL TERMINATED BY '|'
   , FILLERCOL         FILLER TERMINATED BY '|'
   , COLUMN2           INTEGER EXTERNAL
   , COLUMN3           INTEGER EXTERNAL
   , COLUMN4           INTEGER EXTERNAL
   , COLUMN5           INTEGER EXTERNAL
)
INTO TABLE TABLE2 WHEN FILLERCOL <> '1' AND FILLERCOL <> '3' AND FILLERCOL <> '4'
FIELDS TERMINATED BY ',' TRAILING NULLCOLS
(
     COLUMN1           INTEGER EXTERNAL TERMINATED BY '|'
   , FILLERCOL         FILLER TERMINATED BY '|'
   , COLUMN2           INTEGER EXTERNAL
   , COLUMN3           INTEGER EXTERNAL
   , COLUMN4           INTEGER EXTERNAL
   , COLUMN5           INTEGER EXTERNAL
)

Please note that rows which have FILLERCOL as 3 and 4 should be discarded. Sorry, i did not mention this before.

ok, try this.

6 records should be loaded in table1

LOAD DATA
APPEND
INTO TABLE TABLE1 WHEN FILLERCOL = '1'
FIELDS TERMINATED BY ',' TRAILING NULLCOLS
(
     COLUMN1           INTEGER EXTERNAL TERMINATED BY '|'
   , FILLERCOL         FILLER TERMINATED BY '|'
   , COLUMN2           INTEGER EXTERNAL
   , COLUMN3           INTEGER EXTERNAL
   , COLUMN4           INTEGER EXTERNAL
   , COLUMN5           INTEGER EXTERNAL
)
INTO TABLE TABLE1 WHEN FILLERCOL = '2' 
FIELDS TERMINATED BY ',' TRAILING NULLCOLS
(
     COLUMN1           INTEGER EXTERNAL TERMINATED BY '|'
   , FILLERCOL         FILLER TERMINATED BY '|'
   , COLUMN2           INTEGER EXTERNAL
   , COLUMN3           INTEGER EXTERNAL
   , COLUMN4           INTEGER EXTERNAL
   , COLUMN5           INTEGER EXTERNAL
)
                                              

1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:

It is still not loading. Please find the log file attached.

can you try

LOAD DATA
APPEND
INTO TABLE TABLE1 WHEN FILLERCOL = '1'
FIELDS TERMINATED BY ',' TRAILING NULLCOLS
(
     COLUMN1           INTEGER EXTERNAL TERMINATED BY '|'
   , FILLERCOL         FILLER TERMINATED BY '|'
   , COLUMN2           INTEGER EXTERNAL
   , COLUMN3           INTEGER EXTERNAL
   , COLUMN4           INTEGER EXTERNAL
   , COLUMN5           INTEGER EXTERNAL
)
INTO TABLE TABLE1 WHEN FILLERCOL <> '1' 
FIELDS TERMINATED BY ',' TRAILING NULLCOLS
(
     COLUMN1           INTEGER EXTERNAL TERMINATED BY '|'
   , FILLERCOL         FILLER TERMINATED BY '|'
   , COLUMN2           INTEGER EXTERNAL
   , COLUMN3           INTEGER EXTERNAL
   , COLUMN4           INTEGER EXTERNAL
   , COLUMN5           INTEGER EXTERNAL
)

                                              

1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:

no load again. log file attached.

strange...

what if you eliminate the WHEN CLAUSE altogether

Can you try the simple load without filter condition i.e. without WHEN

if i tried without the when condition all the records are getting loaded in the table1, none into table2. Please find the zip file which contains all the files.

If data is being loaded in table1 but not in table2, means the datatype of table2 is not compatible with incoming data

Can you send me the structure of TABLE1 AND TABLE2

OR

Compare the structure of TABLE1 AND TABLE2.

Actually, i tried like this in reverse, it loaded into table2 but not into table1.

LOAD DATA
INFILE 'data.txt'
BADFILE 'data.bad'
DISCARDFILE 'data.discard'
APPEND
INTO TABLE TABLE2
FIELDS TERMINATED BY ',' TRAILING NULLCOLS
(
    COLUMN1           INTEGER EXTERNAL TERMINATED BY '|'
  , FILLERCOL         FILLER TERMINATED BY '|'
  , COLUMN2           INTEGER EXTERNAL
  , COLUMN3           INTEGER EXTERNAL
  , COLUMN4           INTEGER EXTERNAL
  , COLUMN5           INTEGER EXTERNAL
)
INTO TABLE TABLE1
FIELDS TERMINATED BY ',' TRAILING NULLCOLS
(
    COLUMN1           INTEGER EXTERNAL TERMINATED BY '|'
  , FILLERCOL         FILLER TERMINATED BY '|'
  , COLUMN2           INTEGER EXTERNAL
  , COLUMN3           INTEGER EXTERNAL
  , COLUMN4           INTEGER EXTERNAL
  , COLUMN5           INTEGER EXTERNAL
)

table1 and table2 structures attached.

Thank you for your effort and time.