jomelson
asked on
SONY DVD905 disc error C:13:02
Please I need to find some softwares to recover the data of mini DVD I have used in SONY DIGITAL VIDEO CAMERA RECORDER model DCR-DVD905. The mini DVD suddenly can not be read and has this error after accessing " C:13:02 disc error "
First try cleaning the lens as this error could be caused by dust on lens or disc.
If the error still persists, the disc has not been finalized which is usually fatal for the recorded data!
In that case, you still have a chance with isobuster (which is not free) though recovery is not alwasy guaranteed. Here is a link you might like to check out...
http://www.isobuster.com/
Good Luck!
If the error still persists, the disc has not been finalized which is usually fatal for the recorded data!
In that case, you still have a chance with isobuster (which is not free) though recovery is not alwasy guaranteed. Here is a link you might like to check out...
http://www.isobuster.com/
Good Luck!
Oops! Looks like I clicked twice. My apologies.
Oops! Looks like I clicked twice. My apologies.
Are you connecting the camera to the PC or taking the mini DVD out?
ASKER
I have already washed and cleaned the mini DVD, still the same error. The mini DVD is not yet finalized. I need to know the most popular and widely used and tested software to recover the pictures and videos I have taken using SONY DVD Videocam, I don't want to experiment with other recovery softwares anymore coz I am more afraid of loosing the precious data.
Ok. The open session needs to be closed before you can read the DVD on the camcorder or on a PC.
- Download the free DVD Decryptor from the link below and install it on your PC...
http://www.dvddecrypter.org.uk/
- Load the miniDVD disc into the DVD Writer in your PC and click Tools > Drive > Close and then choose Track/Session/Disc (Try the three options in that order)
- Once the track or session is closed you should be able to read your data.
Good Luck!
- Download the free DVD Decryptor from the link below and install it on your PC...
http://www.dvddecrypter.org.uk/
- Load the miniDVD disc into the DVD Writer in your PC and click Tools > Drive > Close and then choose Track/Session/Disc (Try the three options in that order)
- Once the track or session is closed you should be able to read your data.
Good Luck!
thanks avgavg you saved me typing it up,
jomelson that's why I asked did you remove the mini DVD and the problem is on the PC? not on the Sony?
use your guide matey it shows everything you need to know and save yourself this stress.
just to clarify
Can you put disc back in the camera and then finalise it?<<<<<<
normally on DCR-DVD905 you go to the options> finalise
then you take the mini disc out and can use it on the PC
if you took the mini disc out before finalising it you may have corrupted it.
There is an option to un-finalise it if you wish to add more data later
Did you fill the mini dvd and it cannot finalise it?
jomelson that's why I asked did you remove the mini DVD and the problem is on the PC? not on the Sony?
use your guide matey it shows everything you need to know and save yourself this stress.
just to clarify
Can you put disc back in the camera and then finalise it?<<<<<<
normally on DCR-DVD905 you go to the options> finalise
then you take the mini disc out and can use it on the PC
if you took the mini disc out before finalising it you may have corrupted it.
There is an option to un-finalise it if you wish to add more data later
Did you fill the mini dvd and it cannot finalise it?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Good one there jomelson, I'm happy for you :)
regards
Merete
regards
Merete
If the error still persists, the disc has not been finalized which is usually fatal for the recorded data!
In that case, you still have a chance with isobuster (which is not free) though recovery is not alwasy guaranteed. Here is a link you might like to check out...
http://www.isobuster.com/
Good Luck!