|
[x]
Posted via EE Mobile
|
|
| Search, ask, and monitor your questions on the go with EE Mobile. Visit Experts Exchange from your mobile device and never be out of touch again. |
|
|
|
|
|
[x]
The Solution Rating System
|
|
| With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating. - The Grade of the Solution
- The Zone Rank of the Expert Providing the Solution
- The Number of Author and Expert Comments
- The Number of Experts Contributing
- The Feedback of the Community
Your Input Matters Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site. If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support. Thank you! |
|
|
|
|
Asked by amickfarms in Televisions
I am having difficulty with hdmi distribution to 2 locations in our facilities. I am bringing in two hdmi sources into a Kramer VS-44HDMI matrix switcher and out to a pair of hdmi distribution amplifiers made by StarTech. After that point, I cable up to a pair of tvs over hdmi (one tv per distribution amplifier) and all seems to be well with those. I leave each distribution amplifier and go into a hdmi extender by StarTech and travel 570 feet over cat6 to connect to the other receiver and then to them tvs with HDMI. This is where the problem comes in. It seems every 2-5 seconds, video and audio drops out for a second then comes right back. I am sending 1080i at 60hz and all equipment supports hdcp. Any ideas from anyone?
20091111-EE-VQP-91 - Hierarchy / EE_QW_3_20080625