I wonder why you need an expensive HDTV antenna - all HD channels are broadcast in UHF bands, and I use a 30-year old rusty rooftop antenna that works fine. Unless you are really far away from the source and need a directional antenna to pick up the signal, a simple Radio Shack part will work.
A splitter will work and will lose about 5db on each output, but you should go with a powered distribution amp like the ChannelMaster mentioned above to avoid excessive loss.
Main Topics
Browse All Topics





by: PCableGuyPosted on 2009-08-24 at 19:28:19ID: 25174180
Splitting the signal to seven TVs will make it weaker (there is no choice), but you can compensate.
You might need one of these to get enough signal to each TV.
http://www.channelmaster.c om/product -overview. php?proID= 75&catID=4 0
You might not need an amplifier if there is a lot of signal on all the channels that you intend to watch. In that case, you just need a splitter.
http://www.channe lmaster.co m/product- overview.p hp?proID=7 9& catID=41
You also need to consider this: Do you need to "rotate" the antenna to pick up a particular station? If so, then everyone (or every TV) connected to the antenna will be affected by the current position of the antenna.