When power button is pushed on a one year old Acer Desktop (Just past warantee) there is no picture on monitor-NO beeps-No access to the BIOS-just a black screen. DVD lights go on breifly and...
First of all, specs:
CPU: Core i5 750 @2.66 ghz
Motherboard: Gigabyte GA-P55M-UD4
RAM: 2x 2GB Corsair XMS3 @1600mhz
GPU: Ati Radeon X850XT 256mb
HDD: 2x Seagate 160GB SATA + WD Black 50...
Hi I have a Gateway 510s from Jan 04 has a P4 processor, Motherboard is a AG something. We had the powersupply replaced in April, and the harddrive in May, the ram was also replaced and upgrad...
Downgrading from vista to xp proffessional. Problem is i can't find the SM BUS CONTROLLER. computer is for a PAVILION e9110t.Can Anyone help? HP does not provide drivers for xp professional.
Owner had heavily spyware infected PC.
Had him run Malwarebytes, SuperAntivirus, ATF cleaner.
Removed all infections.
Also did something to the Network adapters.
All have yellow exclamatio...
I just added a Silicon Image SiI 3124 Raid controller, however, the array is not appearing in Disk Management.
The Controller Management Software running in XP shows a healthy configured ra...
I want to Interface USB to Floppy Disk Connector (3.5" 720KB only not 1.44),
Acctually I have a machine which is save data in floppy disk only (3.5" 720KB only not 1.44)
Now I want to save...
i have an old pentium 4 system running win xp. when i turn it on, it stays on for about 5 seconds, then it turns off. like i pulled the plug. any advice is appreciated.
I use a U3 drive and Xoft to check and see if customers computers are infected. Avast, McAfee and other vendors have anti-virus applications for protecting infection on the USB, however these ...
I just finished assembling a Apeva X-Pack 2 computer. This is an all aluminum case model. It seems that it is very sensitive to static electricity generated when I sit at my desk on my vinyl f...
I have a computer that stopped working. After opening the case and pressing the power button I see the only activity is a brief wiggle of the CPU fan. This is only when the power cord is unplu...
I bought some reconditioned AMD 754 motherboards. The only rear connections are a parallel port, the usual USB ports, LAN, and RS232 Com port. How do I connect a VGA monitor? Is ther an adapt...
I'm looking for instructions on how to replace keyboard and hd on Fujitsu Lifebook E Series
Does anyone know of a program that will list all of the hardware ID's on a machine, or factory documentation that will list these? we mostly use Dell and HP business line. i am trying to conso...
Hi guys: I have P III board GFXCEL PC133 computer. Original speed is 533 MHZ but some times when i reset the computer it shows 800 E MHz and the computer is stuck. I dont know why it doing tha...
I'm working on a gateway laptop which doesn't want to load the CD-RW/DVD-ROM drivers for a Philips SCB5265 cd/rw/dvd-rom. I've un-installed the device via the device manager (DM) and rebooted...
Hi,
in Excel VBA, I have a collection of items of used defined type. The collection items are adressed by alpanumeric keys (strings).
How can I find out if a key exists in a given collection...
Either the motherboard or cpu is has some glitches at start up. I want to install my current hard drive with the OS (Vista 32 ultimate) and all of my data to a new computer. Will I run into an...
Hi all,
I currently have a BardPE CD that im using to create images and burn images to computers with a version of ghost on it.
I would like to use a usb disk to load the program for i...
I just swapped out my Intel motherboard with an identical one. Prior to that I had four sticks of memory, each having two gigabytes. The memory speed was 1300 MHz. The memory worked just fine ...
I have a Gateway 510 PC that was on a network and previously booted from that network domain, I believe. I have replaced the HDD, but I cannot get a new OS System to install. It is set to bo...
Hello - purchased an EVGA Nvidia 8600GT. Decided to upgrade from the onboard video.
I first attached it via the VGA cable, since that is what I had been using with the onboard.
Everything...
* I want to put together a pc that's capable for a professional home 1) Music Studio & 2) Graphics Studio (not 3d rendering).
* And these need to be within a small budget. Desktop PCs can be ...
I am trying to burn data on cd-r's and the slowest my DVD/CD Writer on my laptop will write is 10.1x. That is way too fast for the data on these disks and needs to be slowed down to 2x or 4x,...
I have a problem with a PC that has started to ramdomly reboot. This happens any time, from when I'm trying to log on to up to 10 minutes after loggin on.
It DOESN'T happen if I start the PC ...
