Based on the following information, I have determined that the update located at http://h20000.www2.hp.com/
is the correct one. Can someone (jamietoner?) verify?
Property Value
BIOS Version COMPAQ - 20010405
686P2 v2.11
BIOS Date 04/05/01
BIOS Vendor Compaq
Version 686P2 v2.11
Release 04/05/2001
BIOS Size 512 KB
Characteristics - supports booting from ATAPI ZIP drive
- supports booting from LS-120
- supports AGP
- supports legacy USB
- supports ACPI
- Multi Processor supported by BIOS
- supports INT 17 printer services
- supports INT 14 serial services
- supports INT 09 and 8042 keyboard services
- supports INT 05 print-screen
- supports INT 13 3.5-inch/720K floppy services
- supports INT 13 5.25-inch/1.2M floppy services
- supports INT 13 5.25-inch/360K floppy services
- supports INT 13 for Japanese Toshiba 1.2M floppy (3.5-inch, 360rpm)
- supports INT 13 for Japanese NEC 9800 1.2M floppy (3.5-inch, 1024-byte sectors, 360rpm)
- supports Enhanced Disk Drive specification
- supports selectable boot
- supports booting from CD-ROM
- ESCD support is available
- allows BIOS shadowing
- upgradeable (Flash) BIOS
- supports APM
- supports Plug-and-Play
- supports PCI
DMI Version 2.3 @000FE0B0
Main Topics
Browse All Topics





by: jamietonerPosted on 2008-01-07 at 13:24:12ID: 20603364
You'll need to find out what model of Compaq it is then you can go to HP's website and check for an update. If you can't find the model# on the case try this.
SIW- http://www.gtopala.com/