Hi:
I built a new P.C where I installed a new motherboard ABIT VA-10. I ghosted Windows XP professional into a used hard drive. I down loaded the updated BIOS from the ABIT web site on...
My PC is periodically rebooting on its own when under heavy load. I know its either temperature or memory issues. The fans don't seem to increase in speed prior to this occuring so I think i...
ive got a computer getting this error in the system log files. it has been logging repeatedly for many days now.
====================
Event Type: Error
Event Source: Disk
Event Category: ...
while trying to use boot CD. I get the following errors "can not boot from cd code:5"
also when I want to use the restore CD for Millenium OS, I get the following error or "Invalid syste...
I am running a DOS program (connects via com port) that occassionally hangs up the com port. How do I reset it without restarting my machine?
Thanks
Chris
cemerson@northkingstown.org
Hi,
I have never done oveclocking in my life. Easy Tune utility crashes my system all the time. Is there anybody to tell me the optimum bios settings (with all stock hardware) for the follo...
I have a Dell Dimension XPS T600 with a P780 monitor (not a flat panel) running Windows XP Professional.
The monitor has worked fine for close to 5 years. Yesterday, out of the blue, the mo...
greetings all,
Client has given me an HP pavilion 521a running WIn XP Home. When booted the machine returns an error along the lines of 'Ntldr not found'
When I boot the machine with a B...
I use Everest Home to find out about my computer and it says there's a problem: AGP is deactivated which might cause trouble and AGP speed of transport (?) is more then half the size of system...
I emailed Gigabyte Support the following:
Question : My GA-K8NXP-SLI MB is Identified as GIGABYTE NF-CK804 by Belarc Advisor (v.7.0m). Belarc identifies correctly my other system 8KNXPU. W...
system software needed to be reloaded...hardware was working fine...pulled out plug to turn
off computer...(system would not load up)...turned back on, went to windows ME splash
screen...the...
Hello,
I have a custom PC that recently crashed and needed a windows reinstallation. Ever since windows was reinstalled the USB ports have not worked. The computer does not detect the USB p...
I have a Dell Dimension 8400, which came with Windows XP Home pre-installed. I wiped it, and installed my own copy of Windows XP Pro, but to do so I had to change the BIOS disk (SATA) setting...
Hello,
I am looking for an Audio driver for a Gateway E Series Desktop.
I have been looking for quite some time and have tried many different things. From unistall/reinstall with audio ...
I have had to re-install a customer's Dell Optiplex GX520. It did not come with any drivers CD so after the basic re-installation of XP I had to go to another PC and download from Dell's site ...
Hello,
I have aquired a laptop that had the cooling fan replaced recently and so has the cmos battery, and the boot screen will say a error 192. When you test the systemboard, it gives you
...
Hey everyone,
I recently purchased a 9 pin parallel port card. When i plugged it into my ATI motherboard my OS (Windows XP x64) was unable to install the device.
I read a recent thread abo...
Hi,
A few weeks ago I asked a question regarding a non-working Dell Poweredge 600SC rear system fan. The BIOS was reporting that the fan was not working, and upon inspection, the fan indee...
HOW DO YOU UNLOCK KEYBOARD ON AN ASPIRE M 1610
Hi experts!
I have a Dell Dimension E520 with a burnt power supply. The power supply model is H305N-00.
The technical specification of the power supply is:
+5V = 22A
+3.3V = 17A
+12VA =...
Dell Optiplex GX270, win XP OS. When a user logs into PC they receive the folloiwng message
secondary drive 0 not found
strike F1 key to continue, F2 to run setup utility
Press F2 to run ...
Simple issue - How do I get rid of the error message when I boot up my GX1 OptiPlex? It says Alert! Cover was previously removed. Dah, I know I opened it.
I am trying to find the SATA drivers for a UK PC. It's an emachine 3240 and has some sort of generic intel mb. I've tried Emachine's tech support but unbelievably they don't have the necessary...
Motherboard = Asus P5PE-VM
CPU = Intel Pentium D 2.8 GHz
Memory = Kingston 512 MB PC3200 DDR
My problem is when i boot my computer theres an error appear....
"Intel CPU uCode Loading E...
I would like to perform a low level format on one of my BAD SECTOR DETECTED hard disk.
How can I go about doing that? Need any software? Can I find it under my BIOS or OS?
Thanks.
cwh
