I've rebuilt a Dell Optiflex GX270 - found and installed video and sound drivers - can't identify the driver I need for the built-in Ethernet card. Anyone know which one I need.
I've tried 8 ...
I am dual booting 98 / XP on a brand new HP Compaq dx2400 microtower that was essentially designed for Vista. Windows 98 is critical and cannot be avoided. Intel of course doesn't have win98...
I can't get my old Seagate eSata exterior hard drive to load on my Window 7 pc. Are they not compatible? I've downloaded the new drivers, etc. But no luck.
Hi all
Just after drivers for an iQon GUS01 desktop machine.
I've searched high and low, and it would appear that iQon are out of business so no support there either!
Does anyone know...
I have a Dell Remote Access Card version 5 (firmware 1.4) and I have lost the login credentials. How do I reset the password (or whole card) to restore factory defaults? I cannot run the racad...
I am developing a webserver for an embedded system using LPC 2368 and lwIP. Basic webserver is working, I have tested it by putting a constant HTML file. Now, I need to load a dynamic web page...
Hello,
We currently have 4 Samsung SyncMaster 930xt thin clients. These are running Windows XP embedded. We have had similar HP thin clients in the past, but these seem to have software p...
I have inherited looking after a website, part of which is translating it into Chinese and German.
Whilst the translation is not difficult, the UTF encoding on one of the embedded fonts doe...
My new MB BioStar TA790GX XE bios seems to be set correctly, no usb's in the boot chain, and now I've disabled them too. It even happens when the only drive in the boot chain is my one windows...
I"m having trouble with the low performance of the video card on-board the MB. How do I persue the pci add-on options and what do they do exactly. I have a two monitor set up that I want to ke...
I hope someone can help me. I am trying to embed a google calendar onto a website for a client of mine (using dreamweaver for web site software). The calendar part has been created and I know ...
Just bought a SOMIKON color slide scanner bundled with Arcsoft software suite. I can't calibrate it properly and get a very bad result - too much white. Funnily enough as the picture comes up ...
Ok All,
By day I am a network administrator in a primarily windows enviroment, so my linux is rusty.
Anyhow, I have a project where I would like to make a call to a device on a cell netw...
Suddenly my writemaster DVD will not read any of my DVDs. The drive starts up and green light comes on then after few mins, it stops not having recognised anything in that drive. It won't work...
Hi,
As the title says, I am looking for a hardware device that provides me with or can handle AT LEAST all the following :
- HDMI port
- extra dvi or vga output
- SATA2 (or USB2 if only ...
I have some code, based on an example from embeddedarm, that reads out the ADC of an EP9302 ARM chip running Linux. The code runs fine when it polls the ADC slowly (1 Hz or so) and gets accura...
Hello,
I have created a website and my information was centered (as most websites look) - solid background, information in the center. However, somehow, the information got moved and is now...
I hope someone can help me. I am trying to embed a google calendar onto a website for a client of mine (using dreamweaver for web site software). The calendar part has been created and I kno...
Can somebody provide me the data transfer rates for USB, Serial and Paralle ports. I want to compare them for some study
