citrine
asked on
HDD Testing tools
I am having no luck with Hitachi HDD testing tools, can anyone recommend anything better?
Is the DiskMark product any good?
Is the DiskMark product any good?
Are you looking for performance/benchmark software or diagnostics?
If your just looking for performance than IOmeter is pretty simple:
http://sourceforge.net/projects/iometer/?source=directory
If your looking for diagnostics UBCD has alot of test and supports most HDDs. This would have to be ran from a live cd/usb:
http://www.ultimatebootcd.com/
If your just looking for performance than IOmeter is pretty simple:
http://sourceforge.net/projects/iometer/?source=directory
If your looking for diagnostics UBCD has alot of test and supports most HDDs. This would have to be ran from a live cd/usb:
http://www.ultimatebootcd.com/
Can you tell us what problem are you trying to solve?
If you suspect your hdd is going bad, a simple utility is Crystal Disk Info. It will give you a lot of info about your hdd, and it will color code it's status: if it's red you need to backup data now and replace it, if it's yellow you should backup data now but can still use it for a while, if it's blue you're ok.
HTH,
Dan
If you suspect your hdd is going bad, a simple utility is Crystal Disk Info. It will give you a lot of info about your hdd, and it will color code it's status: if it's red you need to backup data now and replace it, if it's yellow you should backup data now but can still use it for a while, if it's blue you're ok.
HTH,
Dan
ASKER
Sorry, it is a Toshiba MK6465GSX
For Toshiba hdds you can use the Windows or DOS diagnostic tool from here: http://storage.toshiba.com/storage-services-support/warranty-support/software-utilities
ASKER
Hi Dan, I have tried that a number of times, it doesnt work, I have seen other reports that it is temperamental.
OK, so what it is that you want to do?
ASKER
Test the reliability of the drive
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
What about CrystalDiskMark3, is this any good? Is this up to Industry Standard?
Yes, it's good, but it won't give you reliability data, only benchmarks.
What Industry?
What Industry?
ASKER
"industry standard" is a term used to describe a professional line of products
you said you had no luck - tell us what problem you have first!
all free diagnostics are without any label - for what i know
you can look at smart info of the drive
is it a normal drive, or an SSD - you never said what it was?
first i run the disk diagnostic for the drive brand - long test
then i also use HDDRegenerator (not free) , before i put a disk again into service - to check if all is well -
then i consider the drive in good health - if no errors were reported
all free diagnostics are without any label - for what i know
you can look at smart info of the drive
is it a normal drive, or an SSD - you never said what it was?
first i run the disk diagnostic for the drive brand - long test
then i also use HDDRegenerator (not free) , before i put a disk again into service - to check if all is well -
then i consider the drive in good health - if no errors were reported
This would help greatly with a suggestion