The modem is detected properly by Windows ME. It is set on COM4, IRQ10. There are no conflicts with other devices. ME can communicate with the modem (when I press the "More options..." tab, I...
Recently I purchased a USB multi serial com port at : http://www.titanelectronics.com/show/usb8com.htm
: from a USB port I added 8 serial com ports.
The point is that I run an a...
I am using internet in my office. My PC is connected to 100MBPS Lan Ethernet Adapter. Operating System is Windows XP Pro and its a Pentium 4, 1.6 GHZ with 256 mb Ram.
I want to connect to ...
My Creative modem is long removed but I've still got a non-working icon in control panel callled "Modem settings" with a Creative icon on it. It doesn't work of course, never did, but I can't ...
When using dial up 56k I'm getting error 720 on my Windows 2000. The modem connects to the ISP but is unable to verify the correct password and username. I recently upgraded my hard drive and ...
I'm using a notebook (Dell 6000) and its inbuild modem doesn't support voice call. I purchased a Netcomm Rave II USB modem but seems like it is half duplex and telephone is not possible (eith...
Hi Experts ..
I'm using TRENDnet external modem (full-duplex) to make a phone call without using phone device, I've connected the line to the modem and I'm using hyperterminal to make the c...
I'm trying to connect to a modem which will only respond at 2400 baud. If I try from an old standalone desk modem, it manages this fine. Through a Cisco MICA modem in our access router, it s...
I own a small company doing database hosting for a very specific market. These customers connect to my servers via standard MS networking PPTP tunnels to a couple of MS RRAS servers. I started...
Where can I download the driver for a Rockwell 56k internal voice fax modem? If you need more info I can open the computer and read the board.
P.S. I quickly checked the Rockwell site and did'...
I have this USB card for internet access. I have another computer that will only accept a connection (software issue - I am stuck with the program) thru a plain old telephone modem connection...
I have a customer's laptop computer (HP Pavilion dv6200 CTO) in my shop for repair.
She had a lightning strike near her home a few weeks back, and she was unable to connect to her dialup I...
I'm pretty new to Perl, but loving it for the most part. Right now, however, I'm beating my head against the wall trying to install a module (Device::Modem) to work on my version of ActiveSta...
I just got the service of internet and telephone from my cable company, they gave me the modem that handles both. Internet is perfect and I want to know if I can make the phonecalls from my pc...
My new modem works fine for downloads and for short uploads (up to about 10 k), but larger uploads are exceedingly slow (sometimes around 100 bytes/sec, in a 33k modem). This happens both in P...
I´m done searching the net, i´m desperate....I need drivers for nt 4.0 for the (title) modem....
ati3 response(in win98)= 2.1.2.154.005
ati4 response(in win98)= Rockwell 56k HCF Data,Fax,Spe...
I recently upgraded from Windows 95 to 98. 98 could not find drivers for my modem, but luckily I kept a backup of my old Win95 folder, and after a bit of searching found the right driver for i...
Hi there,
I was looking for new motherboards and found AOpen's AX6BC motherboard and in specifications it has a feature of
1. WAKE ON MODEM or Wake on Zero Voltage Modem.
2. WAKE ON L...
This is a very specific question about the HSP56R AMR Modem, made by PCtel.
First off, please skip the n00b answers, this is no simple problem.
Anways, what happens, is in anywhere from ...
I have my harddrive partitioned and have installed Win 98 on one. I have tried to install my modem drivers but it cannot find the modem. It looks for the modem on COM1 and COM2, but in XP the ...
I'm building a VB app that communicates with a noise station though a modem line. So far i've been able to establish a connection with the remote modem. I send the command MSComm1.Output = "AT...
I just built a new system based on a Gigabyte GA-7VM400M running XP Pro and I'm having similar problems with three completely different modems:
Pragmatic I56PSP-F30 (PCTel PCT789T-C1 Chip)
...
Other people have had this problem and it was recommended that I delete the modem, update the driver, and reboot. The modem was found when the system rebooted, and
I was then able to enter st...
Hi !
I woder if there is a device out there who is capable to convert Analog to ISDN.
Or if you know a modem Who is capable to snook the PhoneNumber from incoming calls ?
Regards
I trying connect two modems USB interface in Windows 2003 STD edition.
But i have a loot of probles.... Blues screens and CPU helds.
if i connect a single modem dont have probles, all be...
