Here is my setup;
DSL modem to CIsco 5505 to PC
PC is connected to port 1 on firewall. I also have another NIC#2 connected to a cash register for polling data. When both ethernet cables are ...
I have several Intel servers with 2 NICS in, only one of which is used. These server are DC and file servers.
- Is it worth teaming the NICs to make use of the one I am not using?
- Do I nee...
Im running windows server 2003 with 2 intel nics. I enabled both nics and did a bridged connection for load balancing. I need to set a static ip back on the server but when i open up the pro...
Dell Latitude D830 with Dell 1385 mini-card fails to connect. Monitors in both WLAN utility and Windows Networking show normal signal strength on Netgear MR814V2 and several other routers in ...
All of a sudden my LAN adapter on my laptop does not respond. The device manager says the driver needs to be reinstalled, but when I do so I get "cannot install this hardware, access is denie...
two XP Home PC's each with 2 nic's. Each PC connects to a router and then the router to Cable modem. PC One has all the office files and PC two opens large graphic files and they wanted it q...
Hello,
I have a Toshiba Satellite A105 with Win XP SP3. When I try to boot up with Built-In Lan Enabled in bios, it gives me the BSOD with the message... Plug and play detected a driver er...
Just got my T400 a week or so ago and have been getting the following message in Event Viewer:
Type:Warning
EventID: 5033
Source: Netw5x32
Description: Intell(R) Wifi Link 5100 AGN: The ...
I have been having trouble in the last 2 weeks connecting to a wireless connection from this laptop. This is a new issue. I was traveling much of the time and sometimes could connect and somet...
Hello.
Is there a good list of all virtual NIC's OUI out there?
I need to make sure that MAC addresses that i receive belongs to unique hardware.
The most i could find is vmware, virtua...
I am installing a new NIC (Network Interface card) on a desktop computer Linux (Debian).I am new for Debian and I whant to making sure that it has been detected and the kernel is aware of it...
I have a terminal server with two ethernet cards. Can I have each one connect to internet on different gateways.
There is never a convenient time to run backups of individual user desktops. We don't use profiles on our domain as it's too slow to log on and off as we work with very large files.
I don't...
I'm having trouble sharing my internet connection (Local Area Connection 2) with other computers over the wireless network connection I have made using a usb wifi device. It was working up unt...
Our Dell PowerEdge 2800 server has twin on-board Intel(R) PRO/1000 MT NICs. Originally in 2005 the people that installed the server only connected one NIC to the switch. I upgraded the nic dri...
I am at wits end and desperate....
I uninstalled Proset 13.1 on my server 2008 (x64) and rebooted. Then installed Proset 13.3 on the server. Upon completion, device manager shows that the...
Hi,
I need to create a network between 2 appartments, 1st and 2nd floor.
The customer wants to share printers, Internet access (4mbps) and will use VOIP phones.
The main problems are ...
What is the effect of running a wireless network adapter to the same router that the same machine is plugged directly into on a standard network card?
Can I get better speed/reliability? Wi...
I am trying top hook a pc up to a dhcp router but get no connection. when I type ipconfig at the command line I get: An internal error has accorrred: the request is not supported.
Please cont...
I've got a file server with 2 NICs at home. One NIC is 10/100 and plugged into a hub so it's accessible from all computers on the network. The other NIC is 1Gbit and is plugged directly into m...
I have a vista laptop and a verizon broadband card. I want to set it where the other laptop can use a patch cable from there machine to my machine and route to the broadband card.
I just finished reinstalling the o/s on a customer's machine from HP's original recovery discs. The machine works fine except that it cannot connect using the wired LAN connection. Looking a...
We have a Dell Power Edge 600SC server that is a 3-4 years old. It is running Windows Server 2003. About a year and a half ago, we installed CAT6 cables and went with a Linksys RV0041 router...
We use Dell computers for our end users and in the process of updating our switches. We are finding that auto detect is causing a delay in network connectivity. Would setting to 100 Full pro...
Our setup:
WAN IP set 1= connected to Sonicwall Internet Security Appliance
Internal=192.168.2.1
Connected to Linksys gigabit switch
One to one NAT to 192.16...
