What is patch panel? How can I use this in my network? It would be nice if there is diagram and step by steps instruction. Thank you.
I need to buy 30 CAT6 patch cables. I will be connecting them from the patch panel to the switch.
On cablestogo.com PATCH cables are about $15 each. http://www.cablestogo.com/product.asp?c...
I'm still having an issue with a fiber optic signal (1310nm single mode Sonet OC-3) that is handed off to me at my building Demark, and I have no choice but to push it across my existing build...
I will be laying CAT 6 cable from my house to a house in the back. The cable will be overhead; in ground not possible. Since I already have cable, can I get like a sleeve or something to encas...
Am trying to find some blank caps that would be used to cover up a couple ports on a router that I do not want to have a cable inadvertently connected to when installed. Anyone know where I ca...
i have an old network with cables [ cat5 ] that are about 14-15 years old and some are even dry rotted on the outer layer. i sometimes get the network error of can not connect to the server. i...
A client of mine runs a dentist's office. They purchased a house that is about 100 feet away. They want to use that house as an office. They have around 15 computers and a server. I'm tryi...
I have a one cat5 cable to my room and i am running two network from that single cable.
two pair allacated to each.
Now my one pair dose not work.
Is there any possiblity to get it work ...
Hello everybody,
I have an urgent question. I have to run a cable from a T1 junction to a router. Can I use regular old CAT5e to do this?????
Hey guyz.
I never done that before, I was always seperating my cables into dfferents pipes but on this project, my manager wants me to run 5 ethernet cables (cat6) in the same pipe (quite ...
Hi Guys,
I have to run new network wires for one of my customer for their new phone system and also their computers. how do you price this type of job? what are you guys charging , is the pri...
Hi,
I have a Dell PowerEdge server (Report-server) with two built in cards. 1 is connected to are LAN via a switch and the other one isn't in use.
I also have a Intel Quad Network card w...
At my company I take care of coordinating alternative networking options. Instead of an office having a T1 circuit, we use a local ISP, cable, DSL, etc.
One thing that sometimes is a heada...
Trying to provide wireless LAN coverage at a large site. Using a Netgear FS116P PoE switch in conjuncton with LinkSys WAP2000 access points.
Having alot of problems getting power to the ac...
I am looking for the drivers for windows 2003 server for SABRENT 5ft. USB to Parallel ( Printer IEEE 1284 ) .
I lost the CD that shipped wih the printer USB cable.
The link to the CD is...
i would like to know how can i calculate BDP when i have (two hosts sseparated by 10,000 kilometers and connected by a direct link of R= 2Mbps. the prpagation speed is 2.5*10^8 meters/sec).
...
Hi !
This is a simple question, I always wondered what is the meaning of that little symbol next to the label of each one of the interfaces on my router. (symbol is marked by a red circle)
...
I am adding a Sage Server and Exchange server to the domain. Can I use a coaxial cable or do I have to use a switch to connect the servers on the network?
Thanks,
Hi,
I have NTL Cable (virgin media UK) internet at home. I accidently cut the cable now I'm looking for the connector I dont know what it's called and where to look for. I have attached th...
I need to be able to quickly fabricate a serial cable with the following configuration (see attached image).
What is the easiest way to do this? I have a computer hardware store across the ...
Hi, I am stacking 2 Powerconnect 3524 switches with a UTP cable. I use the Gig stacking ports. I want to know the following:
1. What type of UTP cable should I use? Cat5e or Cat6?
2. How l...
We have a narrow space behine the row of racks. There are several LAN cables (CAT6) running between racks and over/beside UPS power cables - all unshielded.
will this seriously hamper LAN ...
Is anyone able to confirm that WinXP file migration wizard is able to migrate 100% of all user settings -
Printer defaults,
Cookies,
Desktop,
Wallpaper,
Shortcuts,
Network drive ma...
I have two building that are side by side in an industrial park. The one building is being refurbished and has had all systems physically removed including old telephone lines etc. The other...
