What is suppose to happen if you hook a switch to a router that doesnt auto cross over and you dont use a crossover cable and same ? but only for a switch to another switch. have done this at...
We recently installed a ProCurve 2810-48G switch - it's pretty much on default settings, here's the config:
; J9022A Configuration Editor; Created on release #N.10.02
hostname "ProCurve ...
how to test my LAN bandwidth?
is there software for this?
basically... i wanna see the differences between my cat5 and cat6 cables... is there software or hardware to measure this? free...
Dear experts i am going to install a small network at office , kindly can you tell me about the colour coding of the network cable i am going to use CAT6 cable.
1) what should be the color co...
What is this usb to rj11 adapter for? I'm just curious.
http://www.amazon.com/Type-Male-RJ11-Plug-Adapter/dp/B000GHTCTW/ref=sr_1_2/002-3242536-6790426?ie=UTF8&s=musical-instruments&qid=1180...
Hi friends !
I am designing and preparing four new computer laboratories. Previously, when I was not an employee of the institute, the institute had hired one company to establish the netwo...
How far can POE go? Does using cat5 or cat6 make a difference in the length or data loss?
Hello experts!
I just bought a house with CAT5 cabling run to about ever room. The are wired up to run regular phones. I have successfully wired up some jacks that run the phones over two o...
I am trying to connect directly to my Linux server (used to be on the net) using an ethernet cable between the two computers without a router. The win XP box cannot see the Linux box to log in...
Can someone give me step by step directions on how to find the wep key inside of the router?
Hello Experts,
Is there a way to determine how many Cat 6 cables I can fit in a metal conduit with 2" diameter? How do you calculate using different fill pecentages such as 40% and 50%. ...
I think i must not understand network wireing as much as I thought i did..I just added to our network and the guy that ran our cable ran Cat5e cable on accident after i had told him i wanted C...
Hello,
I am trying fo find out the proper usage of multimode fiber cables of two different specs.
One is 50/125 and the other is 62.5/125.
How are they different and how can I decide which ...
I am having a second T1 Point-to-Point line added to my existing Point-to-Point so I can bundle with MLPPP. Unfortuately, I may have to extend the Demarc if no one is hired for the job. I ha...
I'm sure this has been asked lots... but can anyone explain how you run an ethernet cable through the wall of a residential home? I've got a cable that I need to run, in the wall, straight up ...
HI..
I would like to know how to connect (FOR INTERNET) using a PC-PC cross cable
1. A laptop and a desktop.
2. Laptop(Dell) running Vista Home Basic.
3. Desktop running XP Professional ...
I was wondering if someone could post some pictures of a properly terminated patch panel and th best way to run the cables.....i need to install a 16 port patch panel on a wall mounted rack, s...
Hi
Can somone please tell me how to wire up a RJ45 wall socket and tell me what tools I need for this..
Thanks
I want to know, what is main difference between Cat5e, and Cat6 cables?
I will be running many home runs of CAT6 cable down to a distribution panel, switch, etc. in the basement. I've decided to use solid wire as opposed to strande wire, but I don't know whether ...
Here is my scenario....
I have a new server that is housed in a room about 30 metres away from the main patch panel and switches. At present a single Cat 5 cable links the 2 rooms. I have n...
Hi all,
I've been trying to first identify and then try to find and purchase different types of RJ45 jacks. There are a few cases that I'm considering and I'll lay them out here for you based...
Telco did not extend the demarc. I need to know the pinout to run a patch cable from the smart jack to either a block or to the router. The telco left the drop and the 4 wire conversion, so ...
What is the difference between a crossover cable and a normal ethernet cable? Can a crossover cable act as a normal Ethernet cable?
Using a cat5 cable, terminating with rj11, what is the pin-out for each end of the rj11?
