Hello,
I am trying to find out the maximum length of the following fiber cables :
LC-LC multi-mode 62.5/125 um
LC-LC multi-mode 50/125 um
SC-LC multi-mode 62.5/125 um
SC-LC multi-mode 50/...
Hi,
Need SATA to IDE Ribbon cable and USB to IDE Ribbon cable. Want to be able to use SATA cable on computer to attach to external IDE slave to copy data from slave.. Also, would like to be...
I admit being a little stupid here - on my computers at home all but one show an icon in the bottom right corner of two PC's When you get a red x in the PC's it means you lost connection. ...
I am trying to run a couple of ethernet cables (Cat 5e) to my existing thermostat location in my home in order to install a network enabled thermostat and remote temperature sensors. My home ...
Good day Experts,
I'm at wits' end with this project. We're setting up wall jacks in the house, and I can't for the life of me seem to get it done right.
We want to connect a 4-port SMC ...
I will be running many home runs of CAT6 cable down to a distribution panel, switch, etc. in the basement. I've decided to use solid wire as opposed to strande wire, but I don't know whether ...
I have a piece of laboratory equipment that transmits lab results to its home computer using an RS232 cable. I have a spy cable monitoring that port for activity as I want to extract the data...
I have re-wired my house, including all data wiring.
I have a Cat5e cable from each room to a central location. The BT master socket is to be installed by the front door. I then have a Cat5...
Hello,
I am trying fo find out the proper usage of multimode fiber cables of two different specs.
One is 50/125 and the other is 62.5/125.
How are they different and how can I decide which ...
I am running Cat5e cable back to a switch for a network. Some of our home runs are over 300 ft. long. Can I put a switch in the middle of these long runs to make it work? Will that power th...
Hi there.
I know DSL is very dependant on the quality of the wiring inside your house., Recently, I changed the cable going from my BT master socket to the ADSL socket near the router to Ca...
I have access to the ESX server console screen.
I have the root login credentials
I'm unable to login via the VI client so need to login on the console screen
Once i've logged in how do I c...
Greetings,
Looking into installing about 1000 ft. (total, not a single run), of Cat 6 cable. I'd like to know what some of the best places are to buy it from, and what I would need in term...
Hello,
I have purchased a security camera & DVR (Clover Model # CDR4060RJ, www.cloverusa.com) to set it up at my business yard.
It has 4 outdoor cameras w/ 60' Ethernet cable, RJ45 connec...
I have windows xp professional.
I have 2 network adapters in first one i receive internet from my provider from cable A.
I have made internet sharing on adapter 1.
On second adapter , I ha...
Whats the maximum length can have a RJ-45 cable to be connected from my router to a device? How many meters?
I've done many cable runs in the past for companies. However this one is different. I need to run about 150ft of cat5 cable inside a office that has drop down ceiling. The only problem is this...
Hello, what is the best way to transfer data directly between two pcs by a direct cable link and how would the transfer of data be then carried out.? Many thanks
Greetings,
I am connecting two buildings 600 feet run with a multi-mode 62.5/125 fiber.
(1) I haven't purchased the network switches into which these will be plugged in. What is the mos...
I've always been under the impression that there are certain guidelines to follow when installing structured cabling for Ethernet. Now I know the 100 meter limit, and the different pin-out st...
We are setting up a new building at our office and have an existing CAT-5 network between computers and switches. We are purchasing new wire for our new location and would like to run CAT-6E, ...
I just moved into a new home, which is a rental. I have discovered that the telephone jacks are wired with CAT5 cable. I do not intend to get a landline phone, and I would like to set up a hom...
I just got a USB 2.0 to RS232 adapter cable so that I plug the rollover cable to a Cisco router. The adapter does not have any name nor a serial number. Which driver should I download to make ...
Hi,
I was given a usb to rs-232 converter without drivers windows seems to recognize this as in "system" i have COM1 and my motherboard don't have one so i think it should be it but when i ...
I have 2 office buildings 1 with 24 users and the 2nd with 24 users. The buildings are 500 feet apart. I have them all connected as follows:
From a Satellite Modem a Cat6 cable runs to a ...
