Anyone know how to run wires in walls?
Here's the deal -
I'm about to do an install for a restaurant sound system. I have lots of experience with audio/video systems, just not running w...
I have added a fourth work station to my network using Cat 5e patch cable to a Linksys router connected to my cable modem. Three other stations are working fine - I have created many such con...
My routers AS Adapter has met with an accident and I have replaced it with my external hard drive's power supply.
Router: Input 240VAC 50Hz 140mA, OUTPUT 12VDC 1A
External Hardrive: 100 -2...
We have 7 3com 4200 switches were using solar winds to monitor our network all switch ports set to auto negotiage and pcs- Im thinking of changing these to full duplex. Im using solarwinds or...
I have to connect two buidlings on our campus that are relatively close together and wanted to ask if the setup I have for it sounds correct. we are using shielded cat5e for the task as both b...
Hi
I have a juniper 5 Gt Netscreen firewall that i need to connect to its console port from my laptop. I need to know what kinf of cord that i need to purchase so that i can perform this tas...
I am the new IT person for a small manufacturing company running an ethernet network of about 50 clients. While working on the switch bank in the network closet, I've been plagued by some very...
Dear Experts,
What is the best tools which implemented EIA/TIA 606-A standard For Structured cabling ?
Best Regards
Hamid reza
Im using a ~30m (give or take 10) cat5 that runs through the roof to the other room with my router. Im unable to connect to the router (shows disconnected) unless i set it to 10 full/half dup...
What is the difference between UTP and network cable?
Hello,
We recently had a server get damaged through a Lightning Strike. The Server is on a UPS, but apparently the electrical spike went through the Cat5 cable, and fried the onboard NIC c...
hello,
I bought one nexans LANmark-6 U/UTP CAT6 LSZH 305m box ( N100.607) with these properties:
http://www.cablelines.co.uk/pdfs/nexans/ne100_607n.pdf
But i cant put it on cat 6 RJ-45 Plu...
I have 2 LAN's that are 150-200m away. I need to make a link between them as fast as it can be, so I am thinking of laying down an optical cable. Since I have never done that, here are the que...
Hi,
A client has several CNC machining tools which connect to the network via a female DB25 port on the machine. Job configurations are sent to the machines from the network.
Several mach...
Alright I think im screwed but I want to make sure there is not a solution out there. I have 2 switches that i need to connect to each other via fiber optic. I got the to connect to each other...
hi,i have a hdd from a damaged laptop i want save information from this hdd to my laptop.i have got an ide-usb cable but i dont know how i can transfer data.i connected it to my laptop but the...
Hi friends !
I have recently joined an educational institute. This institute is covering a big geographical area. It is not running in a big 4-5 stroy building. All the class rooms, labs, o...
I've two PCs distant 100m/300ft. one from the other.
Within a budget of $1000 what's the fastest current solution for connecting them?
Are network cards, cables and plugs certified for 10gib...
Can you give me some link where I can see some comparasions of different manufacturers cables. Like, which one is better: Belden, Teldor, Draka, etc... Are they in a same class, is one much be...
We are rewiring our network and introducing patch panels to keep things organized. Everything for the most part has gone smoothly. However, we are having connection problems with a few of th...
I ran into an issue after taking over a Network Admin job at a local company. Turns out the guy before me ran wiring from the wall directly into a switch, with no patch panelling whatsoever in...
basically I have labs that are currently on wireless connections. This is not working to well, as the connection tend to flood me with AD errors, and connection errors. I would like to run cab...
I have add a new pc on my network and a made a 30 meters cable one to one. I have tested that with the CT BRAND CABLE TESTER and it seens that it works. When i connect it to the computer the c...
Our school is building a new building and we have found that we have to run a fiber line to complete a connection to a new segment.
The company that is running the lines for us is doing all...
What do you think I should try next?
Ok I have a Linksys SRX200 connected to a Punchdown port to a Switch.
The Ethernet ports work just fine on the WAP when connected to a Switch directl...
