I have a 3800HGV-B Gateway as part of AT&T Uverse install. I just discovered it does not have loopback.
I have multiple port ranges forwarding to multiple IPs on the LAN:
Ex: 2000-2010 to ...
i have asa 5500 series exactly asa 5510 when i acces with my browser with ip address, i cant start the asdm, when i show flash i know that there a no asdm software installed, hi guys can u h...
I have an ASA 5505 with 3 vlans , vlan1, vlan2, and vlan3
vlan 1 in secure (inside)
vlan 2 is the internet (outside)
vlan 3 is unsecured (open)
here is the interface config
hostname...
Is there a way to configure Web Content Filtering without using Websense or Smart Filter in the new Cisco ASA 5510?
Hi there,
I'm relatively new to setting up firewalls, and last weekend I installed my first ASA 5505 for a client. The install went well, however, RIGHT when I needed to leave I noticed th...
HOW reset juniper password netscreen 25
I hv backup conf file
Hi expert,
How open ports (5450 to 5455 & 15352 & 16970 & 15600) outgoing & incomming on ssg5 last firmware
Untrust site => Dynamic ip ISP
Trust site => ip range 192.168.x.100 to 192.168....
I have purchased Juniper SSG 140 Firewall + VPN appliance. Currently I am using ISA as the edge fire wall. Now I want use SSG 140 as the edge. I have to NAT (one -one) 4 Servers to SSG. I have...
Hi,
We have a Comcast Business SMC Networks modem hardware version 1B and are having problems getting PPTP to pass through. I have called Comcast and they say it should work. The only opt...
Does anyone know of a nice, easy, cheap method of monitoring bandwidth usage on an ASA 5510? I just put it in to replace an old Sonicwall. The one thing I liked about the Sonicwall is that I...
Hi,
How do I setup Quality of Service on my ASA5505 - basically I want to give SIP traffic priority.
Thanks
David
Hi,
I know this will be easy I am sure. I have a TZ180 configured for a client but would like to enable web remote management so myself and the client don't always need to remote desktop o...
I have a strange issue. I started to created a very basic config with no rules and no VPN.
The ASA boots up and runs fine for about 10 minutes and then it drops all connections (internal and...
Is it possible to configure Site to Site VPN with Cisco ASA 5510 Where both sides has got same Subnet. ?
From Subnet A , I need to access some Servers in Subnet B , Can I do natting at Subne...
Hello all,
I am trying to configure a DHCP(d) reservation in a Cisco ASA 5505 v.7.2. For the life of me, I can't seem to find an answer or figure it out on my own. I already have DHCPD co...
I'm unable to access this asa via aasdm or http/https since the upgrade to the new version.
Anyone....
Good evening,
I have a Cisco 877 running the ADVIPSERVICES T-Train image and have the following setup:
+-----------+
LAN |============|Cisco 877|=====...
I've recently moved a (new) client's server (and network) from one building to another. During the process, I needed to replace the Sonicwall Firewall (due to damage). Now I am in the position...
Hi guys,
I'm as green as they come in terms of networking.
I had a Cisco ASA 5510 with three interfaces connected: "inside", "outside" and "dmz". They were all configured all right, and ...
We have 5 static IPs (all in the 255.255.255.248 subnet) via our ISP. We usa a SonicWALL Pro1260 (Enhanced OS) for our router/firewall. We have only ever used one of the IPs (as the WAN addr...
First, the Cisco Vpn Client does connect, but ping, tracert, rdp won't work. 10.0.25.0
Second, the site 2 site vpn does work and has ping, tracert and rdp working. 10.x.2.0
We are currently getting smashed in spam and hackers trying to get through our cisco router 837 which runs our DSL Connection for our Mail and DNS Servers, as multiple hundreds of connections...
Experts
i have a cisco asa 5505 im trying to connect to a 5510 via l2l vpn.
phase one negotiations are failing.
VPN should be
phase one; Group 2 3DES-MD5
Phase two; NOPFS-ESP-3DES...
Hi
I need some help regarding cisco vpn client authentication. We have a vpn concentrator and a cisco acs. This is how it is done... The user database is created on the cisco acs and the grou...
Hello,
I have a FortiGate 60B firewall. Since we put it in place, it's blocked the Apple software update on our Mac OS 10.4 machines. As a test, I turned the protection profile on outbound ...
