Hello,
I was wondering if any one can help.
We have a Juniper Netscreen NS25 which is 4 years old and is running Screen OS 5.0
I have tried to go about this the correct way and get a ...
Hello,
Is there a way to bypass the Cisco router FW / IP Inspect commands. A customer's router is configured to block login.live.com. One person in the company does need to access the site....
There are Two parts to this question:
Firstly, the URGENT bit - I have a redundant nokia ip350 firewall which still has some old config on it. I need to wipe the config clean but I cannot ...
We have a Switchvox Voip system in our data center behind a Sonicwall 2040 running 3.1 Enhanced. There is also several other servers on this network performing other functions. Utilizing VOI...
For some time now I have been managing this NS5GT device and I have had many occasions where I cannot stop the Large ICMP packets from getting to the firewall. I created a policy to reject al...
Hi all,
Now my company are using a SonicWALL PRO 2040, and my company is need using the VPN daily by daily .....
The SonicWALL now the VPN starting to unstable, so I need sometime fo...
I'm adding a new Windows SBS 2003 to my network for webhosting and Exchange email support and I need some help in deciding what the best option is for getting the server connected to the Inter...
Can someone give me a hand, Im trying to create an Access-list allowing a customers network that we host, access to our SQL Box, The network admin that I'm replacing had already created object...
We have a server located in a shared building. We do not have control over our internet connection but recently requested an upgrade in bandwidth.
Before upgrading we had the following port...
I need web content filtering for a 20 user network. I am aware of appliances that use a subscription based service and also software like Websense and some free ones like Smoothwall. Does th...
I have a Cisco asa 5505 that will be connected to a T1. Please advise how to port forward ftp. Also, not sure if I have to use our public ip for the outside interface or create a network betwe...
I am trying to configure a PIX 515e to allow inbound and outbound traffic on port 3306. I can not get it to work, and am not very farmiliar with Cisco configuration. here is what is already ...
Hi All.
We have a Cisco ASA 5505 providing security for 2x servers in a data-centre. The servers behind the firewall both host FTP servers of their own and connect outbound to other FTP ser...
Hello,
Having issues getting (anywhere) near the full bandwidth capacity of our 10/10 fiber connection using the a SonicWall TZ190W we've recently purchased. The appliance is pretty much se...
We are using the IPSEC clients right now and I'm configuring the ASA to use the anyconnect client. Before changing any settings, I tried to connect and it didn't work. Then after configuring i...
Experts,
I have taken over on a network where no documentation was left behind. I am trying to see what the NAT address is of each of the six servers are for documenting. On each server if I ...
Greetings Friends...
I have an ASA 5505 on my network, that I need to "poke-a-hole" in to allow SMTP traffic. I thought I had set this up properly, but alas, it does not seem correct. I s...
Please review site1 and site2 configs. The site-to-site VPN tunnel will not come up.
Both site ASA's return:
# sho crypto isakmp sa
There are no isakmp sas
Thanks
I have a Sonicwall TZ150 (connected to my Comcast cable modem) and a spare Linksys WRT54GS wireless router. Running SBS 2003 R2 on my live network. I also have a virtual network, using Virtual...
We have an ASA 5510. I have set up VPN access in the past for our staff to access the network remotely. Had not problems with that. Now I am trying setup access for a Vendor and I need to f...
I have recently setup a Netscreen SSG5 firewall/Router on my network and have configured static routes to an MPLS router for traffic destined to a remote site. When I try and connect to any se...
Hi
i got a messaeage when i try to con. to my cisco pix firewall via Cisco ASDM Launcher v1.5(24)
(Unable to launch device manager from ip_add) <--- error
i'm running Java Runtime Environ...
Hi Guys,
We're switching out old PIX 501s for ASA 5505 appliances and I need some help here as I'm new to the ASA product. Currently, we have a few locations terminated via PIX into a Cis...
How do I recover a lost password on my ASA 5510 Series Content Security SSM-10 without re-imaging the entire OS?
Just setting up a watchguard appliance from scratch to do the following main task.
Allow two users web access, one with access to almost all categories of sites the other with very limited ac...
