hi..EXpErt$
is ther any ASA emulator available ???
Hello,
Does anyone know if name resolution is possible through a PPTP VPN tunnel - using a Linksys RV082 VPN router?
I am using the PTPP software built into Windows XP on the client side...
Could somebody please point me in a direction I could use for troubleshooting a configuration on a BlueCoat CacheFlow SA-725?
Any help that can be provided would be greatly appreciated.
...
I have a new ASA 5505 firewall with Security Plus license that is configured with 3 interfaces--outside, inside and dmz. I can configure it to allow outside connections to the DMZ, inside and ...
hi Experts. I have a NetGear FVS318 (version 1) that I just bought for a client and I thought I would do some prep work before I show up on site. Luckily I found out at my office that I coul...
I have a Sonicwall Wireless TZ 170 and someone at a recent tech day told me that I could use the E-Mail filter section to block all EXE files from being downloaded. If this is true, how might ...
Hello,
I want to configure my ASA 5505
I can download anything using port 42640
but I want to block all the uploads from this port
I have a passing knowledge of Cisco routers, certainly not advanced by any means, and have set up a Cisco 2811 ISA router/firewall for my company using the SDM GUI interface. We have a single...
I want to have monitor the traffic flow for a Netscreen 50 Firewall.
May i know is it have Netflow Protocol which like Cisco routers.
And how can i enable and setup if it do? Many thanks.
Hi,
I am trying to set up a site to site VPN on my cisco 877 adsl router. Everything seems to go ok when i test the tunnel until i hit the firewall test. The test fails at this point and the...
Hello Experts -
I have a Sonicwall Pro 3060. I need to configure it to point two external addresses to internal addresses. They need to be wide-open (not specific port forwarding). How c...
We have an environment that has 2 internet gateways. One is a cable connection going through a SonicWall and the other is a T1 going through a Cisco ASA 5505. The Sonic connection also is doin...
Hello-
I have a Juniper Netscreen 5 G that I am trying to open RDP tcp 3389 on the untrust interface and map it back to an internal host. I had created a policy in the GUI for this but...
I have a typical setup with an ASA5520 inside, outside and dmz.
I have a server in the dmz 192.168.90.4 255.255.255.0 which has dns enabled
My inside network is 192.168.200.0/24
I hav...
HI
We have two offices, one in Florida and one in California. Florida is the main office and Calif. is a small office with 5 users. Currently the offices are connected by a point to point...
After implementing Exchange 2007 and getting OWA working. I decided to use a Barracuda to handle the Spam problem. Well, my problem now is how do I redirect the smtp traffic that was headed to...
HI. I am getting a problem that is My ASA is not allowing the Data Transfer more then 3Mbps. Can any one tell me what is the reason. Secondly when i try to ping the firewall it works with 32by...
Dear Experts
Last three days we are facing a constant packet loss while pinging our mail server IP , which is 3 Mbps 1:1 RF link. Due to this reason, we are unable to send mails from mail c...
From a computer in DMZ I can't get to internet. I can get to internal network fine, but not the internet.
Can you help?
Here's my setting below.
x.x.x. = public IP.
: Saved
: Wr...
As the subject says, I'd like to configure the ASA5505 for web filtering. Is there a SW upgrade or license I can add that would make it a web filter?
I'm attempting to restrict SMTP traffic to only accept from Trend Micro's IP Range, as we use their hosted A/V, Spam service.
I set up a firewall access rule to accept SMTP sourced from li...
I have a PIX 515e firewall with 3 interfaces (Inside, ISP_1, ISP_2). I currently have everything routed to ISP_1 but I would like to route all Web Browsing traffic (port 80 and 443) to ISP_2 a...
I have a configuration question, i have a client that has Linksys RV016 that they want to configure one wan1 port to upload and the wan2 port for download. They have 2 different ISP's. Is th...
Hi Experts
I have Netscreen 25. we purchased it last year.One of the guy was configuring it.He colud not configure it and left the company.Now i am going to configure it.But when i start th...
We recently moved from a Watchguard Firebox firewall to a Juniper SSG 320. We have 7 total locations/branches and they all can access the Internet via the Juniper. The Juniper has static rou...
