Hi All,
I have a Cisco ASA 5510 I am configuring and have run into a weird issue that's probably not weird to you, but I don't understand it.
I have VPN Clients configured. They have a s...
I have Nokia IP 300 cluster (Nokia VRRP) and OSPF activated on 3 interfaces.
I noticed that the OSPF routing table shows only on the active unit, but have not tested failover after I saw thi...
Hello this is my network.
I have a router cisco i cant manage (it's managed by isp) that give me internet connection.
Behind i have a Cisco Pix 501 with internal ip 192.168.1.1
Behind i h...
I have a Firebox X700. I am attempting to change the MTU but cannot find where to change it. This is for a static IP, not PPPoE. It is not under Policy Manager, Network->Configuration->Externa...
I have a Debian box setup for routing and security. Shorewall does the routing and firewall settings. I have setup a box successfully for two interfaces, however now I need three. Eth4 with...
Hey everybody,
This may be listed somewhere, but I couldn't find the correct search terms if that is the case.
I have a SonicWALL NSA 3500 with Enhanced OS 5.0 installed. I am connecting...
I have a VPN congfigured on my sonicwall tele 2 and cannot seem to figure out how to setup a connecting using the WIndows Xp connection wizard. it works for our cisco PIX firewall but not for ...
I have configured a Cisco ASA 5505 to sit between our network and a vendor network. We do not want NAT running between the two. The vendor controls the router attached to VLAN12 on the ASA.
...
The church that I am helping is getting a SonicWall TZ 180 firewall mainly to do content filtering. We have a dynamic T1 connection to the internet. The Telco has a Cisco box that provides u...
I have two netscreen 25's. One at our office, and the other at our colocation facility. We've been accessing our servers at the colo over a VPN but have recently added a pair of T1's so we c...
We are deploying ASA 5505 to home users who currently have a Internet connection along with a wireless router(not provided by us) I looking for a way to VLAN a port on the ASA and provide Int...
I am trying to set up a VPN Tunnel from our home office to a remote office, but have been unable to get it working.
The home office has a Linksys RVS4000 has two existing tunnels.
The remote...
I have a customer that is requesting a "secure" guest Doctor unsecured wireless access point. We have a SBS 2003 lan with a Linksys RV042 firewall router. DSL in and 192.168.1.x inside IP. We ...
I am tasked to my joy with setting up a Blackberry Enterprise Server.
For this purpose I need to enable port 3500 on our firewall. It is a SW PRO 4060.
I believe I need to define the ser...
I have a server that uses a smtp realy off of our spam filter (a meridius box). The two boxes used to be in the same DMZ and the relay worked fine. Well we have now created a higher security...
Okay,
Firstly thanks for taking the time out to read my question. I hope you can get your head around this problem that Im having. Im tearing hair out trying to fix it.
I am trying to se...
Hi,
Im trying to manage the above firewall via the wan interface but Im not able to get into the web interface when I type its public ip. Is there a setting which can be change to allow rem...
Hello everyone,
Can someone advice me the best way to setup a Transparent proxy with authentication or something like it??
Thanks...
I would like to know what's the best practice of network design. I found 3 design as shown in the attachment.
First one - Use only way firewall with 3 interface (3 subnets)
Second one -...
I am currently in the middle of a firewall migration. The old firewall is a Watchguard running Mezzaluna OS. The new firewall is an ASA 5510. The watchguard text configuration in a bit cryp...
We have users "sitting" behind a PIX 525 firewall, internet connection works great, but we are not able to VPN to our satelite office in Florida. Each time we try to connect we get the follow...
Our firewall log some teardrop attack these days. some external ip keep this attack to our firwall.
We are using netscreen firewall 50.
Any idea how can i handle this attack? Thanks.
I just got the Cisco ASA 5505 and I am having some issues setting it up. We have 5 static Ip addresses ranging from 67.XX.XXX.130-135. The ip address to my router is 67.XX.XXX.129 which is o...
I am trying to setup logging on my ASA 5505, I need to just log www and https, could you plaese help?
I need to configure my firewall/server to grant access to certain websites based on the USER, and the only way I can see to do this is through WebBlocker policies on our WatchGuard firewall. F...
