I added to my existing pix config for a new site-to-site VPN and in the process dropped all cisco vpn client users. Below is what I have added to the pix for the site to site VPN that dropped ...
I have been given the task of hairpinning one of our VPNs so they can go out the same interface. We have a web filter and it is desired that when vpn users are connected they use our network i...
I have been asked to solve a problem which I'm not very familiar with. I've setup remote VPN access before but not with these options. My company has to be PCI compliant and we have a firewall...
Hi,
I have 2 x ASA 5505 firewalls at 2 different locations which i am trying to use for a lan to lan vpn,
when i run sh crypto isakmp sa detail
the device returns
There are no isakmp sas
...
Hi,
I have a Fortigate 60 firewall. I'd like to know how I can tell when I'd need to upgrade the firewall and when it is sufficient for my use.
1. Are CPU utilization and memory utilization...
I have a Cisco ASA 5505 router that I just bought to replace a Netgear FSV318 router at our main office here. This was put in place by the person before I got here and they tried to cut corne...
currently have a tunnel between two sites and I am wanting to create a VLAN between those two sites to handle only traffic for vide conferencing to prioritize the packets. One one side of the...
I have a Sonicwall 2040 and I also have a linksys spa 3102 and 2102 voip ata setup configured to be point to point so it is basically bridging the phone line across the country to our californ...
Hi,
I'm struggling to connect to my PIX 501 using a DOS telnet session, below is my current and working running config for my home cable environment, any pointers as to any errors in the co...
Hi!
So, this is my first ASA... little bit help needed:
I have Cisco ASA 5505 and two public ip-address, one for outside interface, one for incoming mail server. I have configured Stat...
Can a Cisco ASA 5510 (ASA5510-SEC-BUN-K9) failover to a 5505 (ASA5505-SEC-BUN-K9)?
I know there are 25 vs 250 VPNs...which is fine. I have the 5510 already, and I am looking to purchase an...
I need assistance creating a Access Rule in my ASA that will stop outgoing mail that is not directed to my smtp server.
I need to create this rule thru the ASDM interface not thru the conso...
Hi, I want to disable ping from Internet, I don't want anybody can ping my
external ip address
I am using ASA5505
How can I disable PIng from Internet?
I have a client who wants to allow 3 users to use email but not have acess to the Internet. They are using Verizon as their ISP connecting with a Verizon wirless router connected to a switch....
Hi Everyone,
We've been using Cisco VPN Concentrator 3000 series for a long time with very few problems. We recently put some of our servers into a new subnet on the network. However, th...
Hey everyone. i'm used to the cisco routers so i don't really get how the pix works. never had a hardware firewall before. i'll give you a little backround on what i have at home (it's a lab f...
I have a Sonicwall tz-170 The wan ip adress is XXX.XXX.XXX.73 . This is the adress that my MX record for inbound mail translated to via a NAT . Inbound mail works fine. Upon sending an ...
I have had to change over to a BT Home Hub as a router and I can now no longer connect to my server remotely, when I am out at client sites.
Has anyone got experience of setting a Home Hub ...
Hi,
I have a T1 line that has 6 available public addresses adn I am trying to setup two distinct routers that connect to a Windows 2003 Active Directory domain. However, only only one route...
sonicwall Tz170 appliance & preventing students from accessing websites [i.e. airaim & vtunnel.com, etc..]
i know i could possibly change the hosts file to point to itself [loopback] but th...
Hi,
Can anyone details how I block both MSN & Yahoo Messenger on my PIX 501 running V6.3
Thanks in advance
Hello,
I have a small network (DC/fileserver, Exchange server, 8 users) with a Cisco 1841 managing the T1 connection to the internet.
My question is, in this environment, is a hardware f...
Hi Experts. I have a NetGear v1 FVS318 FW/router that I am setting up for a client that is using DSL. Their ISP requires username/password and is configured with PPPoA/35 settings. I had th...
I have cisco 800 router connected to the ISP and it is connected to a Juniper SSG5 firewall on E port 0/0
all my trusted network is connected to E port 0/3 through a network switch
my ISP as...
I'm conifguring RWW on SBS 2003. The firewall in place I'm not too farmilar with it's a Juniper-NS5GT. I need to configure the Firewall ti akkiw SSH to the SBS box from the WAN. I also need to...
