flippes
asked on
SonicWall 2040Pro to tz170
My network looks like this
network a - sonicwall 2040Pro (enhanced) - internet - Dlink - SonicWall TZ170 - network b
I have troble to get the TZ170 on my VPN connection.
The TZ170 is set to transparent.
In the log on the 2040Pro it tells this:
10/20/2007 05:05:06.672 Warning VPN IKE IKE Responder: Proposed IKE ID mismatch 217.91.86.235, 500 87.61.32.98, 500 VPN Policy: DE IceTech; Local ID type: USER FQDN; Remote ID type: IP Address
2 10/20/2007 05:05:06.464 Info VPN IKE NAT Discovery : Peer IPSec Security Gateway behind a NAT/NAPT Device
3 10/20/2007 05:05:06.256 Info VPN IKE IKE Responder: Received Main Mode request (Phase 1) 217.91.86.235, 500 87.61.32.98, 500
Hope any one can help
network a - sonicwall 2040Pro (enhanced) - internet - Dlink - SonicWall TZ170 - network b
I have troble to get the TZ170 on my VPN connection.
The TZ170 is set to transparent.
In the log on the 2040Pro it tells this:
10/20/2007 05:05:06.672 Warning VPN IKE IKE Responder: Proposed IKE ID mismatch 217.91.86.235, 500 87.61.32.98, 500 VPN Policy: DE IceTech; Local ID type: USER FQDN; Remote ID type: IP Address
2 10/20/2007 05:05:06.464 Info VPN IKE NAT Discovery : Peer IPSec Security Gateway behind a NAT/NAPT Device
3 10/20/2007 05:05:06.256 Info VPN IKE IKE Responder: Received Main Mode request (Phase 1) 217.91.86.235, 500 87.61.32.98, 500
Hope any one can help
ASKER
I'm not behind a nat connection. I have tryed to set local IKE ID and Peer IKE ID but it didn't work.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
under the first tab of the VPN configuration you need to specify the local IKE ID and the Peer IKE ID
Local IKE ID: (must match Peer IKE ID on initiator)
Peer IKE ID: (must match Local IKE ID on initiator)