[x]
Posted via EE Mobile

Search, ask, and monitor your questions on the go with EE Mobile. Visit Experts Exchange from your mobile device and never be out of touch again.
Question
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!
9.2

Allow Microsoft VPN Access Through ASA5505

Asked by nickbeentjes1 in Networking Hardware Firewalls, Network Software Firewalls, IPSec Security Protocol

Tags: Cisco, ASA5505, ASA5505

Hello,

I am behind an ASA5505 and need to access a customers network using the standard Microsoft VPN Client.

Please can you help with my config - see below :

asdm image disk0:/asdm521.bin
no asdm history enable
: Saved
:
ASA Version 7.2(1)
!
hostname LynxsAU
domain-name LynxsAU.Local
enable password 8Ry2YjIyt7RRXU24 encrypted
names
!
interface Vlan1
 nameif inside
 security-level 100
 ip address 10.1.1.1 255.255.255.0
!
interface Vlan2
 nameif outside
 security-level 0
 pppoe client vpdn group Lynxs
 ip address pppoe setroute
!
interface Ethernet0/0
 switchport access vlan 2
 no nameif
 no security-level
 no ip address
!
interface Ethernet0/1
 no nameif
 no security-level
 no ip address
!
interface Ethernet0/2
 no nameif
 no security-level
 no ip address
!
interface Ethernet0/3
 no nameif
 no security-level
 no ip address
!
interface Ethernet0/4
 no nameif
 no security-level
 no ip address
!
interface Ethernet0/5
 no nameif
 no security-level
 no ip address
!
interface Ethernet0/6
 no nameif
 no security-level
 no ip address
!
interface Ethernet0/7
 no nameif
 no security-level
 no ip address
!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
clock timezone EST 10
clock summer-time EDT recurring last Sun Oct 2:00 last Sun Mar 3:00
dns server-group DefaultDNS
 domain-name LynxsAU.Local
same-security-traffic permit intra-interface
object-group service TTMessenger tcp-udp
 description TT Messenger Protocols
 port-object range 10822 10822
 port-object range 5059 5061
object-group service uTorrent tcp-udp
 description uTorrent Ports
 port-object range 51958 51958
access-list inside_nat0_outbound extended permit ip any 10.1.1.128 255.255.255.192
access-list inside_nat0_outbound extended permit ip 10.1.1.0 255.255.255.0 192.168.10.0 255.255.255.0
access-list outside_cryptomap extended permit ip any 10.1.1.128 255.255.255.192
access-list inside_access_in extended permit tcp host 10.1.1.251 any eq smtp
access-list inside_access_in extended permit tcp any any eq www
access-list inside_access_in extended permit tcp any any eq domain
access-list inside_access_in extended permit tcp any any eq pop3
access-list inside_access_in extended permit tcp any any eq https
access-list inside_access_in extended permit udp any any eq domain
access-list inside_access_in extended permit tcp host 192.168.10.201 eq 49221 host 10.1.1.201 eq 49221
access-list inside_access_in extended permit tcp host 192.168.10.201 eq 49221 host 192.168.10.201 eq 49221
access-list inside_access_in extended permit tcp any any eq 3101
access-list inside_access_in extended permit tcp any any eq pptp
access-list inside_access_in extended permit gre any any
access-list inside_access_in extended permit udp any any eq isakmp
access-list inside_access_in extended permit udp any any eq 4500
access-list inside_access_out extended permit tcp any host 121.x.x.xeq smtp
access-list inside_access_out extended permit tcp host 10.1.1.201 eq 49221 host 192.168.10.201 eq 49221
access-list inside_access_out extended permit tcp host 10.1.1.251 any eq 3101
access-list outside_access_in extended permit tcp any any eq 3101 inactive
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit tcp any interface outside eq https
access-list outside_access_in extended permit tcp any interface outside eq www
access-list outside_access_in extended permit gre any interface outside
access-list outside_access_in extended permit tcp any interface inside eq pptp
access-list outside_20_cryptomap extended permit ip 10.1.1.0 255.255.255.0 192.168.10.0 255.255.255.0
access-list outside_cryptomap_1 extended permit ip any 10.1.1.128 255.255.255.192
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPN-DIAL 10.1.1.150-10.1.1.160 mask 255.255.255.0
asdm image disk0:/asdm521.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface smtp 10.1.1.251 smtp netmask 255.255.255.255
static (inside,outside) tcp interface www 10.1.1.251 www netmask 255.255.255.255
static (inside,outside) tcp interface https 10.1.1.251 https netmask 255.255.255.255
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route inside 10.1.2.1 255.255.255.255 10.1.2.201 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
group-policy Adaptec internal
group-policy Adaptec attributes
 vpn-tunnel-protocol IPSec
group-policy LynxsAU internal
group-policy LynxsAU attributes
 wins-server value 10.1.1.250
 dns-server value 10.1.1.1 10.1.1.250
 vpn-tunnel-protocol IPSec
 default-domain value LynxsAU.Local
username password encrypted privilege 15
username attributes
 vpn-group-policy LynxsAU
http server enable
http 10.1.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto map outside_map 20 match address outside_20_cryptomap
crypto map outside_map 20 set peer x.x.x.x
crypto map outside_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 40 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 86400
tunnel-group LynxsAU type ipsec-ra
tunnel-group LynxsAU general-attributes
 address-pool VPN-DIAL
 default-group-policy LynxsAU
tunnel-group LynxsAU ipsec-attributes
 pre-shared-key *
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group x.x.x.x ipsec-attributes
 pre-shared-key *
tunnel-group Adaptec type ipsec-ra
tunnel-group Adaptec general-attributes
 address-pool VPN-DIAL
 default-group-policy Adaptec
tunnel-group Adaptec ipsec-attributes
 pre-shared-key *
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
vpdn group Lynxs request dialout pppoe
vpdn group Lynxs localname
vpdn group Lynxs ppp authentication pap
vpdn username password store-local
dhcpd auto_config outside
!
dhcpd address 10.1.1.2-10.1.1.129 inside
!

!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny
  inspect sunrpc
  inspect xdmcp
  inspect sip
  inspect netbios
  inspect tftp
!
service-policy global_policy global
client-update enable
prompt hostname context
Cryptochecksum:571940f6c18a2feb36763de8a8f3aab1
: end

 
Related Solutions
Keywords: Allow Microsoft VPN Access Through …
Title
1 Route VPN Traffic through ASA550…
2 Cannot port forward smtp to mail serve…
 
Loading Advertisement...
 
[+][-]11/13/07 03:38 PM, ID: 20276409Accepted Solution

View this solution now by starting your 30-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

About this solution

Zones: Networking Hardware Firewalls, Network Software Firewalls, IPSec Security Protocol
Tags: Cisco, ASA5505, ASA5505
Sign Up Now!
Solution Provided By: batry_boy
Participating Experts: 1
Solution Grade: A
 
[+][-]11/13/07 03:42 PM, ID: 20276465Author Comment

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
 
Loading Advertisement...
20091111-EE-VQP-89 / EE_QW_2_20070628