Hi
We were using a sonicwall pro 4060 untill the power unit blew. We hastily replaced with a sonicwall pro vz which we had spare and which we originally utilised before upgrading to the 4060. I am now in a strange situation. All vpn clients which were configured for the 4060 will work no problems on the vz however no new connections will work and the log output is as follows
2007/11/28 13:04:49:411 Information <local host> The connection "test2" has been enabled.
2007/11/28 13:04:49:791 Information 62.173.92.98 Starting ISAKMP phase 1 negotiation.
2007/11/28 13:04:49:792 Information 62.173.92.98 Starting aggressive mode phase 1 exchange.
2007/11/28 13:04:49:831 Information 62.173.92.98 Received invalid ID information notify.
2007/11/28 13:04:49:832 Information 62.173.92.98 Re-evaluating ID info after notify message.
2007/11/28 13:04:49:911 Information 62.173.92.98 Sending phase 1 delete.
2007/11/28 13:04:51:202 Information <local host> The connection "tidal" has been enabled.
2007/11/28 13:04:51:572 Information 62.173.92.98 Starting ISAKMP phase 1 negotiation.
2007/11/28 13:04:51:772 Information 62.173.92.98 Starting aggressive mode phase 1 exchange.
2007/11/28 13:04:51:773 Information 62.173.92.98 NAT Detected: Local host is behind a NAT device.
2007/11/28 13:04:51:774 Information 62.173.92.98 The SA lifetime for phase 1 is 28800 seconds.
2007/11/28 13:04:51:775 Information 62.173.92.98 Phase 1 has completed.
2007/11/28 13:04:51:782 Information 62.173.92.98 Received XAuth request.
2007/11/28 13:04:51:932 Information 62.173.92.98 XAuth has requested a username but one has not yet been specified.
2007/11/28 13:04:51:933 Warning 62.173.92.98 Failed to process packet payloads.
2007/11/28 13:04:51:934 Warning 62.173.92.98 Failed to process mode configuration packet.
2007/11/28 13:04:51:935 Information 62.173.92.98 Sending phase 1 delete.
2007/11/28 13:04:51:936 Information 62.173.92.98 User authentication information is needed to complete the connection.
2007/11/28 13:04:54:073 Warning 62.173.92.98 The username/password dialog box was cancelled by the user. The connection will be disabled.
The lst line is a cancelled command as i did not want to connect. The new connections are he exact same configuration as the functioning old connections from the 4060. I am perplexed as to why the old connections work and key exchange takes place, but new connections are failing the phase 1 even though the settings are identical.
Thanks
Start Free Trial