Advertisement

12.18.2007 at 09:04AM PST, ID: 23031152
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

Setup VPN cisco Juniper Netscreen

Tags: vpn, cisco, netscreen, juniper
Hello,
I am using a Juniper-Netscreen20 to connect to a CISCO asa with a VPN tunnel.
I am using a routed mode VPN on my Netscreen and I am trying to connect to the cofiguration below
My Tunnel interface is setup as 10.2.300.224 255.255.255.224. When I try to connect to the remote cisco gateway
I pass pahse 1 and right after phase 2 I get the following message
<*.*.*.*>Received notification message for DOI <1><18> <INVALID -ID-NOTIFICATION>, that message makes me think
that my proxy ID values are not matching. as you know I only have one place to enter the remote network address on the Juniper
 
How could I match the remote Proxy ID information with the infor below?

I see 192.168.3.XX and 172.16.2.XX


Acls for interesting traffic;
access-list client-vpn-2-us permit tcp host 192.168.3.54 10.2.300.224 255.255.255.224 eq 1433
access-list client-vpn-2-us permit tcp host 192.168.3.56 10.2.300.224 255.255.255.224 eq 1433
access-list client-vpn-2-us permit tcp host 192.168.3.93 10.2.300.224 255.255.255.224 eq 1433
access-list client-vpn-2-us permit tcp host 192.168.3.175 10.2.300.224 255.255.255.224 eq 1433
access-list client-vpn-2-us permit tcp host 172.16.2.165 10.2.300.224 255.255.255.224 eq 1433
access-list client-vpn-2-us permit tcp host 192.168.3.56 10.2.300.224 255.255.255.224 eq 137
access-list client-vpn-2-us permit tcp host 192.168.3.56 10.2.300.224 255.255.255.224 eq 139
access-list client-vpn-2-us permit tcp host 192.168.3.56 10.2.300.224 255.255.255.224 eq 445
access-list client-vpn-2-us permit udp host 192.168.3.56 10.2.300.224 255.255.255.224 eq 137
access-list client-vpn-2-us permit udp host 192.168.3.56 10.2.300.224 255.255.255.224 eq 138
access-list client-vpn-2-us permit tcp host 192.168.3.57 10.2.300.224 255.255.255.224 eq 137
access-list client-vpn-2-us permit tcp host 192.168.3.57 10.2.300.224 255.255.255.224 eq 139
access-list client-vpn-2-us permit tcp host 192.168.3.57 10.2.300.224 255.255.255.224 eq 445
access-list client-vpn-2-us permit udp host 192.168.3.57 10.2.300.224 255.255.255.224 eq 137
access-list client-vpn-2-us permit udp host 192.168.3.57 10.2.300.224 255.255.255.224 eq 138
access-list client-vpn-2-us permit tcp host 192.168.3.93 10.2.300.224 255.255.255.224 eq 137
access-list client-vpn-2-us permit tcp host 192.168.3.93 10.2.300.224 255.255.255.224 eq 139
access-list client-vpn-2-us permit tcp host 192.168.3.93 10.2.300.224 255.255.255.224 eq 445
access-list client-vpn-2-us permit udp host 192.168.3.93 10.2.300.224 255.255.255.224 eq 137
access-list client-vpn-2-us permit udp host 192.168.3.93 10.2.300.224 255.255.255.224 eq 138
access-list client-vpn-2-us permit tcp host 192.168.3.175 10.2.300.224 255.255.255.224 eq 137
access-list client-vpn-2-us permit tcp host 192.168.3.175 10.2.300.224 255.255.255.224 eq 139
access-list client-vpn-2-us permit tcp host 192.168.3.175 10.2.300.224 255.255.255.224 eq 445
access-list client-vpn-2-us permit udp host 192.168.3.175 10.2.300.224 255.255.255.224 eq 137
access-list client-vpn-2-us permit udp host 192.168.3.175 10.2.300.224 255.255.255.224 eq 138
access-list client-vpn-2-us permit tcp host 172.16.2.165 10.2.300.224 255.255.255.224 eq 137
access-list client-vpn-2-us permit tcp host 172.16.2.165 10.2.300.224 255.255.255.224 eq 139
access-list client-vpn-2-us permit tcp host 172.16.2.165 10.2.300.224 255.255.255.224 eq 445
access-list client-vpn-2-us permit udp host 172.16.2.165 10.2.300.224 255.255.255.224 eq 137
access-list client-vpn-2-us permit udp host 172.16.2.165 10.2.300.224 255.255.255.224 eq 138
Crypto map etc
crypto ipsec transform-set client-strong esp-3des esp-sha-hmac
crypto map client-vpn 5 match address Client-vpn-2-US
crypto map client-vpn 5 set peer 28.9.111.129
crypto map client-vpn 5 set transform-set Client-strong
crypto map client-vpn interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 5
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 28800

Start your free trial to view this solution
Question Stats
Zone: Computer Hardware
Question Asked By: hurdit
Solution Provided By: rsivanandan
Participating Experts: 2
Solution Grade: A
Views: 220
Translate:
Loading Advertisement...
12.18.2007 at 09:51AM PST, ID: 20493933

All comments and solutions are available to Premium Service Members only.

Start your 7-day free trial and see for yourself why Experts Exchange is the easiest and most proven technology resource in the world. Get Started

Already a member? Login to view this solution.

 
12.18.2007 at 10:37AM PST, ID: 20494275

All comments and solutions are available to Premium Service Members only.

Start your 7-day free trial and see for yourself why Experts Exchange is the easiest and most proven technology resource in the world. Get Started

Already a member? Login to view this solution.

 
12.18.2007 at 11:50AM PST, ID: 20494832

All comments and solutions are available to Premium Service Members only.

Start your 7-day free trial and see for yourself why Experts Exchange is the easiest and most proven technology resource in the world. Get Started

Already a member? Login to view this solution.

 
12.19.2007 at 01:04AM PST, ID: 20498271

Rank: Wizard

All comments and solutions are available to Premium Service Members only.

Start your 7-day free trial and see for yourself why Experts Exchange is the easiest and most proven technology resource in the world. Get Started

Already a member? Login to view this solution.

 
01.05.2008 at 02:01PM PST, ID: 20590916

All comments and solutions are available to Premium Service Members only.

Start your 7-day free trial and see for yourself why Experts Exchange is the easiest and most proven technology resource in the world. Get Started

Already a member? Login to view this solution.

 
01.06.2008 at 06:54AM PST, ID: 20594087

Rank: Wizard

All comments and solutions are available to Premium Service Members only.

Start your 7-day free trial and see for yourself why Experts Exchange is the easiest and most proven technology resource in the world. Get Started

Already a member? Login to view this solution.

 
01.14.2008 at 08:52AM PST, ID: 20654337

All comments and solutions are available to Premium Service Members only.

Start your 7-day free trial and see for yourself why Experts Exchange is the easiest and most proven technology resource in the world. Get Started

Already a member? Login to view this solution.

 
01.18.2008 at 10:19AM PST, ID: 20692773

All comments and solutions are available to Premium Service Members only.

Start your 7-day free trial and see for yourself why Experts Exchange is the easiest and most proven technology resource in the world. Get Started

Already a member? Login to view this solution.

 
02.08.2008 at 06:39AM PST, ID: 20850463

All comments and solutions are available to Premium Service Members only.

Start your 7-day free trial and see for yourself why Experts Exchange is the easiest and most proven technology resource in the world. Get Started

Already a member? Login to view this solution.

 
 
Loading Advertisement...
20080236-EE-VQP-29 / EE_QW_2_20070628