Hello
I'm currently have pasted my juniper router config to the question. I trying to setup "rdp" to ip: 192.168.1.5 "6035" to ip: 192.168.1.6 and 6032 to ip: 192.168.1.30 to the DMZ
this is my first junier router so the commands are new to me
thanks for your help in advanced!
Total Config size 5412:
set clock timezone 0
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
exit
set service "RDP" protocol tcp src-port 3389-3389 dst-port 3389-3389
set service "6032" protocol tcp src-port 6032-6032 dst-port 6032-6032
set service "6035" protocol tcp src-port 6035-6035 dst-port 6035-6035
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth default auth server "Local"
set auth radius accounting port 1646
set admin name "administrator"
set admin password "my password here"
set admin auth timeout 10
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "DMZ" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst
set zone "Untrust" block
unset zone "Untrust" tcp-rst
set zone "DMZ" tcp-rst
set zone "VLAN" block
unset zone "VLAN" tcp-rst
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface "ethernet0/0" zone "Untrust"
set interface "ethernet0/1" zone "DMZ"
set interface "wireless0/0" zone "Trust"
set interface "bgroup0" zone "Trust"
set interface bgroup0 port ethernet0/2
set interface bgroup0 port ethernet0/3
set interface bgroup0 port ethernet0/4
set interface bgroup0 port ethernet0/5
set interface bgroup0 port ethernet0/6
unset interface vlan1 ip
set interface ethernet0/0 ip My external IP Here
set interface ethernet0/0 route
set interface ethernet0/1 ip Address
set interface ethernet0/1 nat
set interface wireless0/0 ip 192.168.2.1/24
set interface wireless0/0 nat
set interface bgroup0 ip 192.168.1.1/24
set interface bgroup0 nat
set interface ethernet0/0 gateway GW Here
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface ethernet0/0 ip manageable
set interface ethernet0/1 ip manageable
set interface wireless0/0 ip manageable
set interface bgroup0 ip manageable
set interface bgroup0 manage mtrace
set interface ethernet0/0 vip untrust 25 "MAIL" 192.168.1.5
set interface ethernet0/0 vip untrust 443 "HTTPS" 192.168.1.5
set interface ethernet0/0 vip untrust 3389 "RDP" 192.168.1.5
set interface ethernet0/0 vip untrust 6032 "6032" 192.168.1.30
set interface ethernet0/0 vip untrust 6035 "6035" 192.168.1.6
set interface wireless0/0 dhcp server service
set interface wireless0/0 dhcp server auto
set interface wireless0/0 dhcp server option dns1 DNS here
set interface wireless0/0 dhcp server option dns2 DNS Here
set interface wireless0/0 dhcp server ip 192.168.2.33 to 192.168.2.126
unset interface wireless0/0 dhcp server config next-server-ip
set interface "serial0/0" modem settings "USR" init "AT&F"
set interface "serial0/0" modem settings "USR" active
set interface "serial0/0" modem speed 115200
set interface "serial0/0" modem retry 3
set interface "serial0/0" modem interval 10
set interface "serial0/0" modem idle-time 10
set interface wireless0 wlan 0
set flow tcp-mss
unset flow tcp-syn-check
set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set address "Trust" "192.168.1.30/24" 192.168.1.30 255.255.255.0
set address "Trust" "192.168.1.5/24" 192.168.1.5 255.255.255.0
set address "Trust" "192.168.1.6/24" 192.168.1.6 255.255.255.0
set ike respond-bad-spi 1
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set url protocol websense
exit
set anti-spam profile ns-profile
set sbl default-server enable
exit
set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit
set policy id 1
exit
set policy id 2 from "Untrust" to "Trust" "Any" "VIP(ethernet0/0)" "SMTP" permit
set policy id 2
exit
set policy id 3 from "Untrust" to "Trust" "Any" "VIP(ethernet0/0)" "HTTPS" permit
set policy id 3
exit
set policy id 4 from "Untrust" to "Trust" "Any" "192.168.1.5/24" "RDP" permit
set policy id 4
exit
set policy id 5 from "Untrust" to "Trust" "Any" "192.168.1.30/24" "6032" permit
set policy id 5
exit
set policy id 6 from "Untrust" to "Trust" "Any" "192.168.1.6/24" "6035" permit
set policy id 6
exit
set nsmgmt bulkcli reboot-timeout 60
set nsmgmt bulkcli reboot-wait 0
set ssh version v2
set config lock timeout 5
set wlan 0 channel auto
set wlan 1 channel auto
set ssid name VYML2
set ssid VYML2 authentication wpa-psk passphrase Passphrase here == encryption auto
set ssid VYML2 interface wireless0
set snmp port listen 161
set snmp port trap 162
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset add-default-route
exit
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit
Start Free Trial
