Advertisement

Experts have come up with some helpful tips for getting a solution to your problem fast.

 

Welcome! If you have any general questions about Experts Exchange, feel free to ask me.

 
Time Tested Hardware Firewalls Solutions: 1 - 25 of 827
 
Has anyone got the Anyconnect VPN client to work? Ive downloaded the latest version (anyconnect-win-2.0.0343-k9) I've ran through http://www.cisco.com/en/US/products/ps6120/products_getting_st...
I recently purchased a ASA 5505 and need some assistance in the initial setup. I only need 2 VLANS, business and outside. I used the ASDM Sart up wizard to configure the device in hopes that I...
I am trying to port forward for a VPN over PPTP. I've done this in the past by simply port forwarding TCP 1723; however, in my current situation it doesn't seem to be working. What I have d...
I have a Cisco ASA5510 that's been working fine for over a year now. However, after a reload none of the VPN connections and translations are coming up again. I receive a lot of "%ASA-3-305005...
Greetings, I have a crazy challenge for you all. Just kidding!! this may sound dumb, but I only want to setup the Cisco ASA 5505 to get internet access on vlan0 and have vlan 1 be able to a...
Given below is my running configuration. I cannot seem to allow ping and tracert through the PIX. I have tried the solutions provided here and elsewhere but my attempts to succeed have failed....
SSG-140, 5.4.0r5.0 Relatively new to routing and firewalls so apologies in advance for my ignorance. We have an e-mail server with 5 IP addresses in the DMZ: 10.0.0.71, 10.0.0.72, 10.0.0...
I need help resolving this.  When I connect to my Cisco VPn through a Cisco ASA firewall I get the following error. Secure VPN connection terminated by Peer. Reason 433: (Reason Not Specif...
Hello, I am using a Juniper-Netscreen20 to connect to a CISCO asa with a VPN tunnel. I am using a routed mode VPN on my Netscreen and I am trying to connect to the cofiguration below My Tu...
Experts, I need help configuring an ASA 5505 with a security plus license.I have split up the interfaces between three VLANs (Internal), (external), (DMZ). I am new to Cisco so please be ve...
Trying to configure a Cisco ASA 5510 to allow passive FTP and the connections are failing. Bellow is the configuration. How do you allow passive FTP on the ASA? User Access Verification ...
I want to do something that sounds relatively simple but when I try to actually do it, I cant get it to work.  I have a Cisco ASA5510 with 3 possible interfaces.  Right now I have one interfac...
Is it possible to do bandwidth throttling by protocol on the ASA 5505?  For instance, if I wanted to limit FTP traffic to 1MB/sec from the Internet.  My old D-Link router would do bandwidth th...
Hi experts, We need to setup an IPSec VPN tunnel to a remote site. Other remote site hardware is unkown, but we do know the IPSec settings. Phase 1 and Phase 2 have been configured and fire...
I have a 3800HGV-B Gateway as part of AT&T Uverse install. I just discovered it does not have loopback. I have multiple port ranges forwarding to multiple IPs on the LAN: Ex: 2000-2010 to ...
When I telnet into my ASA I get  "Could not open connection to the host, on port 23 Connect failed I can ping my ASA When I login using Cisco ASDM Launcher I get "Unable to launch ASDM ...
Hi, We have a Comcast Business SMC Networks modem hardware version 1B and are having problems getting PPTP to pass through.  I have called Comcast and they say it should work.  The only opt...
Just got a Juniper SSG-5 and I thought the initial setup might be a little quicker or more intuitive. That being said, I don't have any router experience, so I am sure that is part of the prob...
Approximately how long should it take to upgrade the IOS and activate  a 10-user SSL VPN license pack on a brand new Cisco ASA 5510?
Hi How on earth am i supposed to enable gre 47 on the wrv200. I have read in many forums that it does allow it, I just can't see how? i have enabled pptp passthrough and even put the server...
I am using a SonicWall TZ170 with the 3.2.3.0-6e OS. I need to configure VPN access on the TZ170 (clients will be using the Global VPN Client).  I want my users to authenticate with Active ...
Is there a way to configure Web Content Filtering without using Websense or Smart Filter in the new Cisco ASA 5510?
i have asa 5500 series exactly  asa 5510 when i acces with my browser with ip address, i cant start the asdm, when i show flash  i know that there a no asdm software installed, hi guys can u h...
I have an ASA 5505 with 3 vlans , vlan1, vlan2, and vlan3 vlan 1 in secure (inside) vlan 2 is the internet (outside) vlan 3 is unsecured (open) here is the interface config hostname...
What is the correct debug command(s) to debug a site to site VPN?  I have been using the ASDM logging viewer, but I would rather view this log info in a ssh/terminal session. I am using a C...