We have a Sonicwall TZ190 with the Lan Configured for subnet 10.20.x.x and the OPT LAN configured for 10.30.x.x network with a WAN ip of 10.10.10.4. The WAN interface is connected to a Switch ...
I have a strange issue. I started to created a very basic config with no rules and no VPN.
The ASA boots up and runs fine for about 10 minutes and then it drops all connections (internal and...
Hey all!
I have a quick question about the features of the Netscreen 25 to ASA 5510...
I am establishing a Site-to-Site VPN between these two devices, the office is a 192.168.1.x network...
New to Cisco ASA 5505 here so bare with me.
Have a webserver on the inside VLAN at 192.168.113.15.
Even though our first dns server has www.mydomain.com pointed to 192.168.113.15 on occasio...
I have a Cisco ASA 5505 and a Windows 2003 Small Business Server. I am trying to get the VPN client to use a VPN Group Name & VPN Group Password and a Radius Server to authenticate VPN connect...
Programming Cisco ASA 5505 rule access using the GUI.: Forward RDP to a server 192.168.xxx.xxx internally.
I keep getting VPN TCP FIN, PSH and SYN events logged while I am logged into a sonicwall tz170w over the vpn connection. the addresses are always either the sonicwall or my pc? why is this
...
We are currently getting smashed in spam and hackers trying to get through our cisco router 837 which runs our DSL Connection for our Mail and DNS Servers, as multiple hundreds of connections...
We are installing a SonicWALL TZ190 Enhanced firewall to replace a Cisco PIX 615. The domain has a Exchange 5.5 server that currently hosts the mail but also uses a spam filtering email servic...
Hello,
I have the following problem with a cisco router and a ftp site.
I am able to connect to the ftp site (ftp using the command line) through the internet, ip address 126.126.126.1 (in...
Hello,
I have a FortiGate 60B firewall. Since we put it in place, it's blocked the Apple software update on our Mac OS 10.4 machines. As a test, I turned the protection profile on outbound ...
We have a VPN setup LAN to LAN Sonicwall standard OS and IBM needs to have a port open on the firewall port 5608, I have went under Firewall Service and created a custom service for this port ...
Can anyone give me instructions on how to configure our Fortigate-60 firewall to only allow our mail server to send e-mail on port 25 and block port 25 outbound traffic from all other internal...
I can successfully authenticate VPN connections into my new Cisco ASA 5510 through my AD Server (LDAP). Clients receive an address from a pool I have setup. Once connected, they are unable t...
Environment: Cisco ASA5505 in routed (single context) mode connected to a pool of Public IPs protecting 3 servers that provide inet facing services. Currently I can acvieve external connection...
Hi all,
I have a Virgin (previously NTL) cable modem broadband connection with 20Mbps download (soon to be upgraded to 50Mbps). However, when I do a broadband connection speed test at:
h...
I have two WAN ports already in use. I now have a third DSL line that I want to reserve for external users at a remote office using VPN & RDP (Remote Desktop).
However, i can't seem to rou...
PIX 515E
I can log in via command line, reset Internal IP interface, External IP interface. I then goto config term per the book and run "setup".
this walks me through a couple of setting...
I'm looking for help here. I'm attempting to use WSFTP Pro to ftp a large number of files (backing up a remote website) to my computer. I keep getting "Socket Error"s and "Failed to create s...
I have a Juniper SSG-5 set up as the default gateway for all our workstations and servers, with the internal LAN in the 192.168.85.0/32 subnet. The WAN is on the default UNTRUST interface ethe...
I have a few conceptual questions about the Cisco ASA 5505. I'm not asking any specific configuration questions yet, those will be in another question with more points.
My agency recently ...
I have a SonicWall Pro 2040. Netgear GSM7312 is doing layer Three Routing I think.
2 Vlans are working and communicating vlan 1 & vlan 101 (VOIP) I want to Subnet our Network (vlan 1) into 1...
I have a Sonicwall SOHO3
I would like to setup the following on the firewall for the purpose of RDP...
I want to open as an example port 1980 on the firewall and then reroute all incomi...
The kids' PC is a 700MHz Athlon Gateway box running XP Pro SP2 with 640MB of RAM and two hard discs: a new 120GB one and an older 30GB one that I'm not really using now (I could copy stuff fr...
Hi and happy new year to everyone.
We have a Check Point VPN1 appliance at the main office and I sometimes need to connect to it to view logs using SmartConsole.
I currently connect with R...
