We recently rebuilt a SBS 2003 server and went to attach the clients to the domain. Problem was they were still attached to the old domain. I created a dummy workgroup to switch the clients ...
We currently use a Cisco VPN 3002 to connect to our hosted environment. We do this because our main site does not have a publicly accessible IP address that we can allow unsolicited inbound ac...
I went to the MySonicwall site but it only offers me "free" downloads, after signing in.
What does it take o get the latest firmware update for a TZ170?
Do I need to input it's serial number...
Hi,
My company wants to install 6 managed switches om different floors connected via fiber modules. We already have the fiber panels in place, so it is just a matter af connecting the switc...
What is the best yet most affordable drive copy software. Please explain why and provide links to software.
Copy software needs to be for IDE, SCSI and SATA.
Thanks.
Hi guys,
At my company, I connect the phone to internet jack and then my computer is connected to that phone to have internet. Just wondering, what system are they using ? I heard that we h...
Hi,
I have a weird problem.
A friend has just bought a Lexmark 7500 Wireless All-In-One inkjet printer. I have set its wireless up correctly so that wireless laptops can print from it, a...
We have a flat that we are going to let to students but I want to limit their upload and download speed, so it will not effect our use in the house.
Current Setup is:
ADSL NetgearDG834GT...
We are thinking of hosting our own web page... I realize that there are different types of servers...
right now we are all connected to a router which gives us internet; and we share folders ...
I have a small home network which comprises 2 PC's, a couple of laptops a printer and a PS3. The 2 PC's and printer were connected to a 4 port wireless router which itself is connected to an ...
First and foremost I typically build edge routers that support T1's with Linux and Sangoma/Digium cards. Recently however, I've been tasked to create a system that will potentially utilize an...
I have two Sonicwall TZ180 firewalls with an site-to-site vpn connection. Firewall A has an standard OS , while firewall B has enhanched OS. My ambition is to do Bandwith Management on the con...
our company is about to upgrade its network hardware to some Cisco systems switchs, router and wireless access points. what i would like to know if i need to have a switch with PoE ports to be...
Hi,
We have a main office and two branch offices, none of which are open yet however hardware purchased and ready to deploy.
My design is the same as the first diagram on the following l...
Hi There,
I have a Remote VPN setup on our Cisco ASA 5510 when pinging devices through the VPN tunnel i seem to get packet loss.
Does anyone know what would cause this to occur?
thanks
The problem one of our employees is having is the inability of his computer to boot unless it can find a network. This is not a problem on site, but when he travels it becomes bothersome. If t...
OK guys, I need some direction. I have a back up Fiber connection connecting my remote site data closets. The Verizon guy handed off the 10 MEG line to me in ethernet form on both ends. I n...
I am running a dynamic IP assigned remote office with a VPN connection to the parent office (static lP.)
Everything is in place and has worked for months (years) with the exception of one r...
Hi,
I am trying re-configure the peer-group for particular neighbor after removing the old peer-group from the same neighbor but I am getting the following message while applying the new co...
All,
Hello again! This question is for the small business IT persons here. I currently have a Linksys WRVS440N acting as a VPN/Gateway/Firewall ... as best as it can. I do not have the pass...
I'm trying to allow my internal users to be able to RDP to our DMZ as well as allow HTTPS access between our inside network and DMZ and vice versa. I'm assuming i would need a NAT between the...
I'm thinking about using a point to point wireless solution. My company has 4 sites, connected by fiber. We have just added a fifth, about 3 miles line of sight from one of the existing sites....
Hello,
I assume there is a device that will do this.
I work from home and i am installing at my office a cisco asa5510, and will be using the vpn.
I would like to have a home router that ...
I have two networks with the same IP range. Is there a way to split these two networks with a router even through they are on the same IP subnet?
Does anyone have access online to the tz170 manual and does it give step by step instructions on configuring for failover?
thanks
