Hello there.
My boss has asked me to help improve his wireless network coverage in his, erm, mansion. At present he uses a BT Home hub 8MB. He only receives about a 1/3 coverage of his bot...
Hi All,
Could someone help clarify how a host lets say "A" would communicate with host "B" on the same subnet, but has to pass through hubs and switches and doesn't know where "B" is. In term...
I've got to connect some Printers (USB), one of them is a Ricoh copymachine, to our Network.
I'm looking for a USB to calbe Print Server now.
I had some experience with a Netgear Print serve...
I am building a network-simulator / test bed. I need to use this device to push data to 20 attached devices.
This machine will do some "light processing" based on input/output packet sizes...
I have couple pairs of cisco Pix 5510 Firewall . Dual or Pair of 5510 is used for redundancy purpose . They are working fine . From Pair one is Active & other guy is in Standby mode. For most ...
I have having problem with the first CLI
static(inside,outside) 198.66.93.72 172.16.1.17 netmask 255.255.255.255
access-list outside_in permit tcp any host 198.66.93.72 eq 701
access-group ...
I recently added a new Windows Server 2003 to replace an old Windows Server 2000 server. Both servers were on the network until today. I just transferred all the fsmo roles to the new server...
We have seven users using a DSL 1.5/512 connection and it dies after the third user. I heard something about sharing DSL in the past that it had issues. Is there a way to bypass this problem w...
hi guys,
is there any way we can retrive the pre shared key or vpn password, as i have start a new job and dont know the passwords
can some one help
I have two separate offices approximately 300 yards apart. In the main office I have a Procurve 2810-48 and in the other office I have a Procurve 2650-48. The two switches have been connecte...
Broadcom 440x 10/100 Integrated Controller fails windows hardware test. It willconnect to the inter net (via cable modem), then lose the copnnection). The old driver stopped connecting to t...
Hello,
We currently in the process of upgrading our WAN. Moving away from point to point fiber, over to a Cox TLan/MetroE mesh setup.
I have never dealt with TLan's before, but the actual...
We have to cable two offices in the same building, same floor for network connectivity (server is in one of the offices)
The distance is approx 240 feet, 100mbs. The distance is within the ...
We changed some IP's and I set my switch up to send logging messages to a new IP address, I added the new one without any problem with this command:
logging 10.0.8.2
For some reason I t...
Say you have a system, for whatever reason, connected to a WiFi router and a router via a Cat-5 cable. Which connection will be used?
Hi,
I'd like to setup my Cisco 3650 Switch to take care of interVLAN routing at the main office.
My Setup is:
- 1x Main Office and 2 x branch offices
At every office is a Cisco 1841 ...
When booting a WinXP SP2 machine( not all of them, just one in particular, narrowed down by booting 1 machine at a time) you can watch a constant ping from another machine to a machine on the ...
Hi,
I need some advise on what wireless bridge hardware i should use. I need to connect two buildiings that are about 500ft apart and they are line of sight. I will be running voice across...
I have been seeking new switches and ran across D-Link business class switches such as the Web Smart DGS-1224 and DGS-1248 Layer 2 managed switches. There are few reviews that I could find. Ot...
I have a main 4507 Cisco routing switch that goes out to the internet. Through a direct fiber link I have a 3000 series switch, and then plugged in to that switch I have an 8port Cisco switch....
I have a Cisco 4507R with a wireless LAN controller plugged into it (4402). I also have an access point plugged into the switch so I can test it. Everything is working but I'd like to put one ...
Brain fart. Getting old. Maybe no more a Guru?
Anyway question is:
Got a Windows 2003 Server 2003 R2 X64, 2 NIC's (Dell Server).
Got DSL, (Verizon router/modem combo), set one NIC to 192....
I have planned out a DMVPN deployment for use as backup links into our main datacenter if our remote branches were to go down. I am just having some trouble trying to place my DMVPN hub router...
Is there any major difference in terms of robustness, processing capability, etc, between a residential swtich like you can get off the shelf at Staples or Walmart, and a commercial grade 10/1...
Hi,
It's been awhile since i've had to configure a cisco router and i need some help in making sure i'm doing it right.
I have a set of ports, be that UDP or TCP, that i need to forward ...
