Well what an issue this is I have a netgear dg834g v4 modem/ router which has started to not want to connect to the Internet as in there are no dsl,wireless or phone connection lights coming u...
The setup: Microsoft SBS2003 new installation. US Robotics Courier Business Modem 56K v.92CPNT V.Everywhere V.Everything ROHS USR3453C external fax modem:. I have configured and reconfigured t...
Experts,
I've got a new install of Rightfax 9.3, SP2 running on a virtual server, with a Brooktrout SR140 fax board so I can send my faxes over IP. The server sends the faxes to a Dialogic ...
I am having some problems with my internet connection. altough this is a problem i will have to resolve with my isp i would like to ask if somebody could give me some information why this prob...
Can anyone give a brief bit of advice?
I have a sonicwall TZ100 firewall and was hoping to us a netgear dg834g modem router infront of it but it would seem that this modem can not be made 'tr...
Hi All,
We have a USR5633B, USR265633B 56K USB Faxmodem which we had working on SBS 2003.
We are now running SBS 2008 and I cannot seem to find a compatible driver. I have tried all of t...
I'm having issues with my neighbors stealing my internet connection. I have set up my wireless router, and it works, but I can't figure out how to make it pop up a password when someone tries ...
Probably asked many times, here, but nevertheless, asking again.
This is for a relatively small network, running SBS 2003 with Exchange 2003.
There are couples of users who use Microsoft V...
HI all,
Pretty new to CISCO IOS any gurus that could look at this config and tell me what I have done wrong would be awesome!
Basically everything works DHCP, WiFi, Telnet & SSH. But t...
I have a Sony Vaio VGN-Z750D with a built in Qualcomm Wireless HS-USB Adapter 9222. The vaio has a Smart-Fi utility that controls the wireless devices built into the system, disables the loca...
Hello Gents, i'm having a customer setup a wireless CDMA modem on a remote location.
The modem has "router mode" as well as "IP Passtrough mode", so i thought, simple, just get the public i...
I have spent quite a fair amount of time to try to figure this out and to no avail.
I have a pretty good understanding of Networking and of the Internet but this one has still got me baffle...
I have a Netopia 3347NWG adsl router (model 3347NWG-VGX, firmware 7.6.0.r4).
It has a Covad GUI which has limited functionality (Netopia-Covad.jpg)
Does anybody now any way to remove this Co...
Hi,
I need to setup a server with two modem cards installed, both cards are U.S. Robotics V.92 PCI modem cards.
I have them connected to seperate phone lines etc and we used to have them (...
How could i connect more then 2 internet connection to 1 server ? and how could i control the balance of network behind the server...
The main problem is connecting more then two connection...
Hi, I have a situation involving a 2Wire 2701 DSL modem and a business phone network.
The situation is that the customer has currently cable internet and would like to switch to DSL, the c...
Hi there,
I have a server running Red Hat Enterprise version 5 which would like to install serial modem. I only have one serial port.
When i plug in the modem to the only serial port and r...
If I setup a cisco ASA with multiple vlans on it, do I have to use a cisco switch in order for the switch to recognize the multiple vlans? If not, then what feature/features does the non cisc...
I need help finding a 56k DSVD modem, either internal or external, (Digital Simultaneous Voice and Data). If anyone knows where I can find an internal or external DSVD modem, I would greatly ...
We are running one of the newer versions of Faxmaker, and I have the administrator setup. He started receiving this error a few weeks ago:
***********************************************...
Hello
I have a USR 56K V92 PCI Modem. How can I verify iif the baud rate is at 9600. (The digital line needs this). This is on a Windows Server 2003 running SBS 2003. I need to use this to ma...
Hi, i have a Dell PowerEdge server with a phone modem that i wish to use as a Fax Server. I have setup the fax server and all seems to be working well except for one thing. I have the main p...
I have a sbs 2008 server i just added a us robotics model usr5670 modem into it and configured the fax services when the fax service is running and we are not sending or receiving faxes contin...
I have a new client that has ATT as ISP. They have installed a Motorola DSL modem/router model 2210-02. I need to be able to open and forward 3 ports, one for security camera application and...
I am currently setting up a cisco router that is connecting to a bridged modem via PPPoe.
My Current Config is as follows.
Current configuration : 1373 bytes
!
version 12.4
service ...
