[x]
Posted via EE Mobile

Search, ask, and monitor your questions on the go with EE Mobile. Visit Experts Exchange from your mobile device and never be out of touch again.

Question
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

9.0

Cisco ASA 5505 static route problem

Asked by NewDawn in Networking Hardware

Tags: Cisco, ASA, 5505, route, Static

I just replaced an old linksys wrt54G router/wireless access point with a new ASA 5505 for a new client.

Everything is working fine except I am unable to get it to route to a remote subnet that is connect through a Point-to-Point T1 with a pair of Cisco 1721 routers

The network is setup like this

Main office 10.1.60.0/24
main office Cisco 1721 10.1.60.254

remote office 10.1.61.0/24
remote office Cisco 1721 10.1.61.1

ASA 5505 Local IP 10.1.60.1

The computers in the office all have a default gateway of 10.1.60.1
If I statically create the route on the workstations "route add 10.1.61.0 mask 255.255.255.0 10.1.60.254" An individual workstation is able to connect to the remote subnet

I am also able to ping the remote subnet from the ASA.

The only thing I cannot get to work is for the ASA to route the request to the Cisco 1721 properly. The remote office is completely down at this point as their Phones and internet access all come from the main office.  Any help would be greatly appreciated.

Here is the current running config.

ciscoasa# show run
: Saved
:
ASA Version 7.2(4)
!
hostname ciscoasa
domain-name ******************
enable password rafexqUfMM0XEGAi encrypted
passwd rafexqUfMM0XEGAi encrypted
names
!
interface Vlan1
 nameif inside
 security-level 100
 ip address 10.1.60.1 255.255.255.0
!
interface Vlan2
 nameif outside
 security-level 0
 ip address ************** 255.255.255.252
!
interface Vlan3
 no forward interface Vlan1
 nameif dmz
 security-level 50
 ip address dhcp
!
interface Ethernet0/0
 switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
dns server-group DefaultDNS
 domain-name ******************
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list inside_nat0_outbound extended permit ip 10.1.60.0 255.255.255.0 10.1.61.0 255.255.255.0
access-list outside_access_in_1 extended permit tcp any host ************** eq 3389
access-list outside_access_in_1 extended permit tcp any host ************** eq telnet
access-list outside_access_in_1 extended permit icmp any any
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 3389 10.1.60.10 3389 netmask 255.255.255.255
access-group outside_access_in_1 in interface outside
route inside 10.1.61.0 255.255.255.0 10.1.60.254 1
route outside 0.0.0.0 0.0.0.0 ************** 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 10.1.60.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet 10.1.60.0 255.255.255.0 inside
telnet 0.0.0.0 0.0.0.0 outside
telnet timeout 10
ssh 10.1.60.0 255.255.255.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 10
console timeout 0
dhcpd auto_config outside
!

username ******** password EqL7qWUK0pIRfrNh encrypted privilege 15
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny
  inspect sunrpc
  inspect xdmcp
  inspect sip
  inspect netbios
  inspect tftp
  inspect pptp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:70fbf9b609c48562465540fd3dd8cfa6
: end
 
Related Solutions
 
Loading Advertisement...
 
[+][-]02/17/09 07:12 PM, ID: 23666640Expert Comment

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 30-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]02/17/09 07:19 PM, ID: 23666662Author Comment

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]02/17/09 07:36 PM, ID: 23666724Accepted Solution

View this solution now by starting your 30-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

About this solution

Zone: Networking Hardware
Tags: Cisco, ASA, 5505, route, Static
Sign Up Now!
Solution Provided By: klinko2k
Participating Experts: 2
Solution Grade: A
 
[+][-]02/17/09 07:38 PM, ID: 23666734Assisted Solution

Assisted solutions are selected by the member who asked the question as a comment that contributed to their question's solution.

Start your 30-day free trial to view this Assisted Solution or ask the Experts your question.

 
 
Loading Advertisement...
20091021-EE-VQP-81 - Hierarchy / EE_QW_3_20080625