<div>
Thanks .... each IOS has its own little peculiarities ... 
</div>


Thanks .... each IOS has its own little peculiarities ...

<div>
<div class="content wysiwyg-content">
I have a number of Dell PowerConnect 3348 switches that I am trying to configure with static IPs for management purposes. I have found the VLan IP address and when I try to change it, I get a message that the IP I try and add duplicates an IP interface on the same subnet. I know for a fact that the IP address is unique. I have found a lot of documentation on the hardware and it just mentions that a VLan can only have 1 IP address and that anytime you try and add an IP address is just over writes the old address. Well that is what I want to do, but it is not letting me. The switch is getting the IP address from a BOOTP configuration when it is turned on. &nbsp;Any help?<br />

<pre><code id="code-295130">ip address A.B.C.D. A.B.C.D {subnet} duplicated ip interface on the same subnet
</code></pre>
</div>
</div>


I have a number of Dell PowerConnect 3348 switches that I am trying to configure with static IPs for management purposes. I have found the VLan IP address and when I try to change it, I get a message that the IP I try and add duplicates an IP interface on the same subnet. I know for a fact that the IP address is unique. I have found a lot of documentation on the hardware and it just mentions that a VLan can only have 1 IP address and that anytime you try and add an IP address is just over writes the old address. Well that is what I want to do, but it is not letting me. The switch is getting the IP address from a BOOTP configuration when it is turned on.  Any help?

Dell PowerConnect 3348 Switch Static IP Problem

Networking hardware includes the physical devices facilitating the use of a computer network. Typically, networking hardware includes gateways, routers, network bridges, modems, wireless access points, networking cables, line drivers, switches, hubs, and repeaters. But it also includes hybrid network devices such as multilayer switches, protocol converters, bridge routers, proxy servers, firewalls, network address translators, multiplexers, network interface controllers, wireless network interface controllers, ISDN terminal adapters and other related hardware.

Networking Hardware-Other

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.