Link to home
Start Free TrialLog in
Avatar of petertfling
petertfling

asked on

Reset IP address for HP laserjet 5 printer

I would like to know how to reset ip address for HP laserjet 5 so that it will pick up automatic IP configuration.
Avatar of Rob Wesley
Rob Wesley
Flag of Canada image

Either use the ip of the printer within a browser or access the network configuration at the printer itself.

DHCP enabling can be made at either location.

Rob
Avatar of petertfling
petertfling

ASKER

I know that. I think I am asking for specific procedures to reset ip address for HP Laserjet 5 Printer.

I cannot use the browser to access the printer because the printer has been moved to another location with a different network, unfortunately.

Do you have an internal jetdirect card? Factory reset printer: Turn on the printer while holding down "Online". Keep it down for at least 5 seconds.
If you have an external Jetdirect box, there is a reset/test button on it. Hold it in for 5 to 30 seconds while connecting it to power.
You might also try the HP Install Network Printer Wizard.
ASKER CERTIFIED SOLUTION
Avatar of x3man
x3man

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
gnosis, looks like you also found the same forum post solution :o)
My problem has been resolved. Thank you