Hi, i am setting up a bridge connection and i'm trying to get in the linksys interface. it requires a username and a password. i have tried everything like admin, admin. Cisco, Cisco. only adm...
Hi
I'm having some problems with the configuration of my juniper firewall.
Let me explain the situation: I would like to add different zones(192.168.171.x, 192.168.172.x and 192.168.173....
I have logged into a Cisco 1841 router.
I need to reboot it, do a cold reboot or at least a warm restart of the router.
What is the command line to do that??
My Router is not sending updates to the DYnDNS.org. I set it up, but when the ip address changes the router doesn't do anything here is what I have in my code:
I want to put a mikrotik router in between our core router and clients, so I can deploy PPPoE Server and put the box as trasnparent bridge. What i want is the client to dial the pppoe server g...
During the last hour, my Cisco 1701 router has giving the following warnings.
Can someone please advise on the cause and the fix please.
Thanks
(PS: Ignore the date/time stamps - the ...
Greetings,
We are getting a NAS Appliance to handle our Local and Remote Backup.
We have a SonicWall TZ 210 w/Dual WAN configuration (Static Cable / Static DSL).
SonicWall configured wit...
Morning folks, hoping for some clarification here.
I am setting up a LAN that has multiple layer 2 and 3 devices in differing subnets. My basic hardware config starting from the WAN edge i...
Hi experts. I have spent some time putting together my network which consists of the following:
3com Office Connect VPN Router (Acts as Gateway for 2 WAN connections from different ISPs)
...
I have recently installed a 2Wire 2701HG-B Gateway. It is wireless and the DHPC server. None of the shared network resources can be accessed. This unit was provided by AT&T. They apparently d...
Whenever i configure my cisco router to work on my network, page loading becomes painfully slow. at the bottom of the page it says waiting.....
i ran a test on speakeasy and the speed was ...
I have a Cisco 3640 router whose flash memory I cant see anywhere ... Its size is 32 Mb and I need 64 Mb memory ... But where is the flash memory card for 3640 ? I know for 2821 and 1841 serie...
I have two Cisco 2821 Routers on my company's edge, Router1 and Router2.
I want to use HSRP on the two router's internal interfaces.
I want to use BGP on the two router's external interf...
Hello experts,
I have a problem with a Cisco 857W SOHO ADSL router. The router is up and running in place and working for all LAN traffic. Its also a VPN router for external staff (working f...
Have been suffering some latency issues of late. Dug into my MPLS router and came across the following:
GigabitEthernet0/0 is up, line protocol is up
Hardware is MV96340 Ethernet, addr...
Hi,
I have a requirement which I'm not sure is possible. I need to configure a Cisco DSL router with two internal VLANs, one for voice traffic and one for data. The site is small and so doe...
how to delete a config file out of cisco 1700
Hi
This is a continuous discussion of this one
http://www.experts-exchange.com/Networking/Protocols/DNS/Q_24742829.html#a25366698
Where @experts said to use BGP but BGP seems to be too mu...
I have installed PRTG to monitor our WAN bandwidth utilization but I'm having difficulty configuring it.
http://www.paessler.com/prtg/
Specifically I've never had to configure SNMP befor...
I'm using my router with a 2-wire AT&T modem. I have my modem on bridge mode and i'm using my netgear router for DHCP and routing. It's been working fine for a few months and suddenly this m...
I'm getting a 120MB/sec fiber line internet and need a gigabit router. I need one with a gigabit WAN port and also something to handle that amount of traffic (as I'm sure Ill find ways to use ...
Hi guys
Im new to ciscos so have a limited understanding of them.
Im having a problem with my cisco877 router.
The problem is that I cannot establish a vpn connection to an external server....
I have cable internet and I'm trying to configure a Linksys wireless camera to be visible remotely.
Internet -> Cable Modem -> Linksys Wireless Router -> Linksys Wireless Camera
Inside...
On the Passport there are 2 management blades, Blade 5 and Blade 6 (6 is the backup). Well Blade 5 is having some problems and Nortel has asked me to copy the config.cfg file form blade 5 (f...
So basically here's the situation.
We've requistioned new connectivity at our data center and they are providing two drops to the cabinet, which lead back to two seperate provider routers r...
