So basically here's the situation.
We've requistioned new connectivity at our data center and they are providing two drops to the cabinet, which lead back to two seperate provider routers r...
HI, I just got an old (not used) 871 box and was thinking of setting up this at home. I was pretty used to IOS some years ago, but forget almost everything since then.
So here's what I nee...
How do I configure a router for internal access correctly using SDM or SSH? Here is the config. I can access externally however would I assign an internal address to the open interface and con...
Can someone please tell me how to configure destination NAT on Cisco IOS? I have a web/mail server in the router's DMZ that resolves to the router's public IP (whatever.com = router's outside ...
Hello,
Can anyone give me an example config on how to PAT based on destination address?
Site A:
Cisco C2800 ISR
LAN: 10.10.10.0/24
Public address: 1.1.1.1
VPN Peer 2.2.2.2
Site B:...
Having problems getting the T1 line to come up. T1 works on the ISP proved router. They say this is all I need but it's not coming up. Using a Cisco C2821 with a WIC1-DSU-T1 card
See config...
Hi,
I installed a SSG140 with 4 VLANs
I created 4 sub-interfaces.
default ip is 192.168.10.254
192.168.171.254 in trust zone
192.168.172.254 in clients zone
192.168.173.254 in server...
I am trying to add a new card VWIC2-2MFT-T1/E1 in my CISCO Router 1800 but it is not recognized.
In conf t, try to card type E1command but not working..
In the show diag says:
VIC...
I am having issues setting up vlans. My first issue is that I have set up 4 vlan 10,20,30,40,
At this point I only have computers setup on vlan 10 I have a dhcp server setup on the default vl...
We have just changed ISP providers and out static IP addres has changed. We are using a Cisco 877 router which as just been updated with the new details. Internet is now working again and all ...
Hi all
I want to know based in the experts experience what ports i need to block in my network in order to avoid nasty trafic generated by users that only use the internet with non scence.
I...
If I have the ability to log into Cisco's site and download updated IOS images for my routers, is Cisco going to charge me for the updates even though I am not paying maintenance on the device...
I am attempting to reset the password for an ASA 5505. I am accessing the console through HyperTerminal. After boot-up I receive the follwoing screen.
Type help or '?' for a list of avail...
Need help in setting up the Cisco router to block websites.
Need to block facebook, craigslist, myspace, etc.
I tried the URL filtering but when i enable it, it blocks all websites. (weird...
We have a client that has recently rented out open office space in their office to another tenant so now these two diifferent companies share the internet. We have company "A" on a 192.168.1.X...
I am following this link on how to setup and install Cisco Security Device Manager (SDM) on router using GNS3
http://www.brainbump.net/tutorials/voice/CiscoGns3SDM.htm
When I go through th...
I have to setup a VLAN on a switch (about 5 different LAN subnets). A doctor wants to be on his own subnet while some users are on their own, subnet by some individuals (2) and subnetted by de...
To configure RAID 1 on red hat enterprise linux 5.3 server. I have installed the OS but now the customer wants to configure as RAID 1. There are two HDD's installed with 250G each.
Please a...
We have two Cisco 2821 router and not one of them has an IOS image on them. We have one flash card that does have an IOS image. The problem is the routers will only boot up if the flash card i...
what's the default password for a netgear wgr416
I have thirty LAN to LAN VPN's between my main office and remote offices. The main office is a Cisco ASA 5510 and each remote office is a PIX 501 or ASA 5505. Twenty nine of the VPN's are work...
I am looking to install a Wireless router in my house the house is 3 levels
5,600 square foot what would be the best router and solution for good coverage?
Thanks
I'm a bit noob when it comes to CISCO configs. This one was written by our ISP, and then tinkered with from our PABX people.
We run our own exchange email server internally on 10.10.1.2, b...
Hi Can some one help me how to install srst on the router.
I have a Cisco 2821 Router. When I reboot the router this is what I get:
Initializing memory for ECC
c2821 platform with 262144 bytes of main memory
Main memory is configured to 64 bit mod...
