Hi Experts,
I haven't configured CISCO routers in a while and this is my first attempt after a couple of years. I need to get it sorted very quickly for my customer so please help.
Its a ...
We just purchased a 3845 router with a NM-1T3/E3 card for a DS3 circuit that was just installed. Trouble is I don't know how to configure it. There is a matching router at our other office. ...
Hi
Ive got my Cisco 857 connected to my Sonicwall's WAN port. I have Mailmarshal setup in the DMZ on a server, but I cant get the Cisco to let in any port 25 requests. port 25 between the cis...
I manage a network that is connected to the internet through a Cisco 878 SDSL router.
The configuration of the router is very basic: no NAT, no firewalling, nothing. All it needs to do is to ...
I administer a Cisco 2800 series router with IOS 124-22.T that I am having difficulty connecting via IPSec Tunnel to a Sonic Wall Pro3060 (Firmware: 4.0.0.2-51E) that I do not administer. Ph...
Hi All:
I need to configure a CISCO 2800 Series Router, I have installed a card to connect a T1 line. I have full acces to the router and also have all details for the IP address configuratio...
Hi experts,how we can install ios on compact flash card on 2800 series router.
if router dont have flash then we can use compact flash card as a flash
Hello,
Firmware: DD-WRT v24-sp2 (07/22/09) micro - build 12548M NEWD Eko
Router: Linksys WRT54Gv8 / GSv7
I have configured this router with two SSIDs. The goal is to have a public an...
I have a Cisco 2811 router.
It has an external ip on the wan interface (fastethernet0/0)
Interface fastethernet0/1 is connected to our lan, with a 192.168.1.1 ip address.
I have an addi...
I want to make a router that I can log into and use as a dial out to connect to out of band modems. How can I accomplish this? I have plenty of 2600's to play with and think I can rounc up a f...
I use Cisco SDM to monitor my router and for some minor configurations. Recently I tried to setup VPN and when I click on the "Launch the selected task" I get nothing. The button acts as if it...
I recently bought a Microsoft MN-500 wireless router off of Craigslist. I guess it's pretty old, but it still works. The manual is available here (click on the top link to see the PDF file):...
I would like to know about the size of the IOS files for Cisco ASA/Router/Switch.
I need to use them with GSN3 Simulator.
I am gonna have someone download them and copy them to a flash drive...
I am not able to connect my iphone to my wireless network. My current network uses a Cisco 1130ag router with the following settings (minimum list):
- SSID broadcast disabled
- WPA2 PSK TKI...
How connect Netgear Router WNR2000 to At&T Internet.
I have Motorola modem in which phone cable is attached. From the modem another cable is used to connect to Laptop.
This combination wor...
I have a cisco 2811 Advanced Security (with the 9 port HWIC switch) router that is connected to the drop in my cabinet, What I would like to do is put the router in front of everythinng, and t...
I've been having trouble with my fios internet speed for 2 weeks now. I have 20/5 tier but only get around 9/4 on speed test sites. Now to explain my setup because it's a bit unique.
From t...
This environment consists of a Cisco 2621Xm which provides DHCP services on the LAN (fa0/0) and the WAN (f0/1) it connected via a cable module and it setup as a DHCP client. Setup on the rout...
I have a client that has 2 T1s from 2 different providers. They use the one connection for all of their internet traffic. The other is used right now for incomming VPN connections. On both ...
Hi,
I have a vigor 2910 router which can let me open TCP/UDP ports under NAT.
However, a machine under that network needs to open rtmp to do streaming.
How should I set it ?
I need to enter DHCP options 176 and 242 into my Cisco router which will replace my Windows Server 2003 DHCP server. How do I enter the options circled in the attached JPEG into a Cisco router...
We have a 9 site MPLS network. At two of the sites we have T1 connections( site1 and site2) to a service provider we utilize for our business. We have some of our sites pointed to site1 and so...
Hi,
I have inherited a cisco router, configure fine for use with DSL and pptp remote access.
I'm no cisco expert and am running out of time on this and would love an answer so I can mov...
Hi All,
i have a cisco router where the memory is always saturated at 100%, how can i troubleshoot that type of problem ?
thanks
I am experiencing an odd problem with a Cisco CSM (Catalyst 6500). I have one Web/Application server (windows 2003, IIS 6, WebSphere 6.1 ND). I have 2 web sites running the WebSphere plugin co...
