Hi,
I swear this worked the other day, but I cannot get NAT to work on an ASR running VRF's. I'm trying to NAT the inside IP of 192.168.101.21 to 1.1.1.1 but my outside device shows all pa...
HI ,
Does anyone know , whether there is an internal flash memory card in 2811 routers . cause the one i use in CCNP Lab does not have an external flash slot but it is loading the image fro...
I bought a Cisco RVS4000 Router for the primary purpose of testing routing between the two different subnets on my network. I am not using the WAN port on the router and changed the configura...
Hello everyone!
I have a router in a client that is dropping packets at an considerably high rate.
Attached, please find the running config and show interfaces output of the router.
I...
I'm able to scan SNMP on each device an these are results
Ethernet Swiitch
OID: system.sysName.0 Type: ASN_OCTETSTRING Value: Irvine_Stack
OID: system.sysLocation.0 Type: ASN_OCTETSTRING ...
I am trying to configure cisco client vpn on IOS on a 2821 router. I can connect to the vpn fine on the client pc, but cannot exchange any traffic with the inside local subnet 10.10.69.0/24
...
I am working on implementing a new Cisco 881G Router. The design will be to have a T1 primary for the Fa4 Interface using the Cellular 0 3G interface as a backup. The router will be located at...
Hello,
I have set up a web server assigned it an ip of 10.0.0.11 and created a static nat entry for this very server on the router (ip nat inside source static 10.0.0.11 100.1.a.b). All other...
Hello,
Our internal windows servers need to access external time servers via NTP. However, we are unable to sync them as it appears our cisco pix 515 is blocking NTP traffic. I ran a captur...
This is a 4MB Metro Ethernet Internet access line. What is the typical configurations on the router?
How to verify if the router is operational?
Hi,
We have 10 mbps internet lease line on Ethernet from ISP, we are using the 1841 router for this Wlan link.
here is our setup detail
our server access the internet direct from the r...
I have just brought back my router to life from corrupted firmware update. I reset and configure it and everything to be OK, but it does not connect my wireless G devices. My devices can see t...
hi experts, is there any way that i can check my switch is receiving flooding traffic from other switches ?
and how to stop receiving flood traffic from other switches. i am having vtp server...
I have a new Cisco 861 Ethernet Integrated Services Rouer (ISR) and am trying to configure the device as a router/firewall/VPN server for my small Home/Office. The initial configuration wi...
Hello Experts,
I think a Cisco 877 router will suit our small office needs. I need help deciding exactly which model to purchase. Also, I'd like advice on where to go to get a configuratio...
Hello,
I have an issue which needs to be solved quickly :)
I have a main and a DR site for failover.
Site1: ISP---------2800-------ASA-----ISA----Switch------LAN
...
I have a 3845 router that has the G/E configed for rj45 connection to a LAN switch at 100mb,
I want to chnge it to a SFP port on the LAN switch and the SFP open port at next to the G/E 0/0
C...
I am having issues setting up a new block of public IP's:
I previously set up this Cisco 2801 to receive CAT-5 from a new 40meg Fiber connection and converter box. The ISP gave us a 'test' ...
I have a Cisco 2621 I am using at home and it is coming to a crawl every few hours. Sometimes it takes 4 or 5 hours other times 12-13. It always exits with the same CEF FIB-3-NOMEM disabling...
My Netgear WNDR3300 does not connect between my wireless G 2.4ghz devices. I have 3 wireless G 2.4ghz so if one device is not connecting then I can understand maybe its my device. In addition...
I am trying to use plink to SSH into a cisco 2811 router and change multple descriptions. I am using a command file to do this. It works fine if there is only 1 command in the command file. ...
Can anyone help. I have the following setup
Head Office - SonicWall Pro 4060 SonicOS Enhanced. Network 192.168.10.x
Remote Office - SonicWall TZ170 SonicOS Enhanced. Network 192.168.1....
Hello trying to create a VPN connection between home (dd-wrt VPN) and work (cisco pix 501).
Will have DDNS at home with a Static IP address at work.
Never used the VPN stuff in DD-WRT a...
I have configured my 851 router as follows:
dot11 ssid Your-SSID
authentication open
authentication key-management wpa (needs to be taken out)
guest-mode
wpa-psk ascii 0 Your...
Hi all,
we have 3 internal address ranges
192.168.10.0/24 LAN
192.168.15.0/25 Wireless Lan clients are denied access to the lan from this range
192.168.2.0/24 ISA external interface
s...
