WelfleyTech
asked on
Configuring Cisco 1800/2800 Routers for MPLS
Good morning everyone,
I am hoping that I can find some documentation on configuring some Cisco 1800/2800 Routers to work with an MPLS. I am working with multiple sites, a main office running the 2800, and satellite offices running the 1800's. It will be handling VoIP and Data traffic, with each satellite office having 3-4 people.
So, can anyone point me to some documentation for this sort of thing? All I have found so far is documentation for setting up the MPLS cloud itself.
Thanks.
I am hoping that I can find some documentation on configuring some Cisco 1800/2800 Routers to work with an MPLS. I am working with multiple sites, a main office running the 2800, and satellite offices running the 1800's. It will be handling VoIP and Data traffic, with each satellite office having 3-4 people.
So, can anyone point me to some documentation for this sort of thing? All I have found so far is documentation for setting up the MPLS cloud itself.
Thanks.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
It all depends on the provider. I've worked with AT&T, MCI, BellSouth, and Verizon building MPLS networks and every one is a Frame connection if it's a T1, and every one required BGP. QoS with Diffserv was an option.
And for a routing protocol, it can be RIPv2, OSPF, EIGRP, IS-IS, or BGP. The provider might not support one or more, but they're all possible.