I have a Cisco 1801 router that I am conencting to my ADSL line. I cannot get out of the box, whatever settings I try.
The ADSL connection seems to be ok, as I can see the traffic count in and out increasing, but I cannot get to anything on the internet.
My cleaned up config is as follows. The devices I'm trying to access the internet from are on VLAN1 on the 88.88.0.0/255.255.0.0 network.
I'd appreciate it if someone can point out where I'm going wrong.
TIA
Current configuration : 5707 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname xxxxxxxxxx
!
boot-start-marker
boot-end-marker
!
logging buffered 4096 debugging
enable secret 5 xxxxxxxxxx
enable password xxxxxxxxxx
!
no aaa new-model
!
resource policy
!
!
!
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 88.88.88.88
!
ip dhcp pool sdm-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
!
!
no ip domain lookup
ip domain name yourdomain.com
!
!
crypto pki trustpoint TP-self-signed-xxxxxxxxxx
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certifi
cate-xxxxx
xxxxx
revocation-check none
rsakeypair TP-self-signed-xxxxxxxxxx
!
!
crypto pki certificate chain TP-self-signed-xxxxxxxxxx
certificate self-signed 01
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
quit
username xxxxxxxxxx privilege 15 secret 5 xxxxxxxxxx
username xxxxxxxxxx privilege 15 secret 5 xxxxxxxxxx
!
!
!
!
!
!
interface FastEthernet0
no ip address
speed 100
full-duplex
vlan-id dot1q 10
exit-vlan-config
!
vlan-id dot1q 1
exit-vlan-config
!
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface FastEthernet1
switchport mode trunk
duplex full
speed 100
vlan-id dot1q 1
description inside
exit-vlan-config
!
!
interface FastEthernet2
vlan-id dot1q 1
exit-vlan-config
!
!
interface FastEthernet3
vlan-id dot1q 1
exit-vlan-config
!
!
interface FastEthernet4
vlan-id dot1q 1
exit-vlan-config
exit-vlan-config
!
!
interface FastEthernet5
vlan-id dot1q 1
exit-vlan-config
!
!
interface FastEthernet6
vlan-id dot1q 1
exit-vlan-config
!
!
interface FastEthernet7
vlan-id dot1q 1
exit-vlan-config
!
!
interface FastEthernet8
vlan-id dot1q 1
exit-vlan-config
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface Virtual-PPP1
no ip address
no cdp enable
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-
FE 1$
ip address 88.88.88.88 255.255.0.0
ip access-group 101 in
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
!
!
interface Dialer1
description internet dialer
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap
ppp chap hostname xxxx@xxxx.xxxx.xxxx
ppp chap password 0 xxxxxxxxxx
ppp pap sent-username xxxx@xxxx.xxxx.xxxx password 0 xxxxxxxxxx
ppp ipcp dns request
ppp ipcp wins request
!
interface Dialer2
no ip address
shutdown
no cdp enable
no cdp enable
!
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 100 interface Dialer1 overload
!
ip access-list extended nat-to-dialer1-int
!
access-list 100 permit ip 88.88.0.0 0.0.255.255 any
access-list 101 permit ip any any log
access-list 101 permit icmp 88.88.0.0 0.0.255.255 any
access-list 101 permit tcp 88.88.0.0 0.0.255.255 any
access-list 101 permit udp 88.88.0.0 0.0.255.255 any
dialer-list 1 protocol ip permit
no cdp run
!
!
!
dialer-list 1 protocol ip permit
no cdp run
!
!
!
route-map pat-map permit 1
match ip address nat-to-dialer1-int
!
!
!
!
control-plane
!
banner login ^C
--------------------------
----------
----------
----------
----------
-----
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege le
vel of 15.
Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to use
.
For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to
http://www.cisco.com/go/sdm--------------------------
----------
----------
----------
----------
-----
^C
!
line con 0
login local
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
!
webvpn context Default_context
ssl authenticate verify all
!
no inservice
!
end