The Client was not too keen on an external booster antenna and I was concerned about an all wireless range extender, due to difficult radio path, so in the end I used a Netgear "RangeMax N" Wireless Access Point (WN802T, connected to the main router via higher spec Netgear Powerline adapters (XE103 - 85 Mb/s). Previous Powerline attempt had been with only 14Mb/s units, hence initial reluctance to use them, but at 85Mb/s the extension works fine. The SSID and security setting in the WAP have been set to be the same as the main router, but the two wireless units have been set to operate on different channels. All working fine.
Thanks for suggestions.
Main Topics
Browse All Topics





by: jason1178Posted on 2007-10-18 at 13:12:52ID: 20104250
Hi socross,
/products/ index.php? CatID=32& F amID=58
You can buy either a range extender or external antenna for the router that will extend the coverage area. The range extender will have to be plugged in to a wall outlet for power but it doesn't use "Powerline" networking to do its thing.
The antennas may or may not need to be plugged in to operate. Here's a list of sample products:
http://www.hawkingtech.com
You can set up routers to go in bridge mode, but whether or not you do this depends on the total area you need covered. If this is for a home, a simple range extender or antenna may be the better solution.