Advertisement

12.18.2007 at 09:36PM PST, ID: 23032787
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!
9.8

SpeakEasy T1 line keeps going down

Asked by andersenks in Network Routers, Networking Hardware

Tags: , ,

This line just keeps bouncing on and offline... it worked fine for the last 2 months but now the last two days its been doing this. SpeakEasy says that everything tests fine up to the smart jack. Don't understand it... nothing has changed. Repunched down all the wiring and replaced all the network cables... very frustrating...Start Free Trial 
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:

interface Serial0/0/0
 mtu 1522
 bandwidth 1536
 ip address 64.84.86.116 255.255.255.0
 ip access-group inbound in
 ip nat outside
 ip inspect myfw out
 ip virtual-reassembly
 encapsulation frame-relay IETF
 ip route-cache flow
 no ip mroute-cache
 no fair-queue
 frame-relay map ip 64.84.86.1 16 IETF
 
When its up...
Serial0/0/0 is up, line protocol is up
  Hardware is GT96K with integrated T1 CSU/DSU
  Internet address is 64.84.86.116/24
  MTU 1522 bytes, BW 1536 Kbit, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation FRAME-RELAY IETF, loopback not set
  Keepalive set (10 sec)
  LMI enq sent  407, LMI stat recvd 382, LMI upd recvd 0, DTE LMI up
  LMI enq recvd 0, LMI stat sent  0, LMI upd sent  0
  LMI DLCI 0  LMI type is ANSI Annex D  frame relay DTE
  FR SVC disabled, LAPF state down
  Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0
  Last input 00:00:05, output 00:00:05, output hang never
  Last clearing of "show interface" counters 01:35:07
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 13
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     13143 packets input, 4184722 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 16 giants, 0 throttles
     8037 input errors, 8037 CRC, 2993 frame, 994 overrun, 0 ignored, 4968 abort
     18947 packets output, 9692261 bytes, 0 underruns
     0 output errors, 0 collisions, 34 interface resets
     0 output buffer failures, 0 output buffers swapped out
     53 carrier transitions
     DCD=up  DSR=up  DTR=up  RTS=up  CTS=up
 
When it is down...
Serial0/0/0 is down, line protocol is down
  Hardware is GT96K with integrated T1 CSU/DSU
  Internet address is 64.84.86.116/24
  MTU 1522 bytes, BW 1536 Kbit, DLY 20000 usec,
     reliability 255/255, txload 22/255, rxload 2/255
  Encapsulation FRAME-RELAY IETF, loopback not set
  Keepalive set (10 sec)
  LMI enq sent  485, LMI stat recvd 452, LMI upd recvd 0, DTE LMI down
  LMI enq recvd 0, LMI stat sent  0, LMI upd sent  0
  LMI DLCI 0  LMI type is ANSI Annex D  frame relay DTE
  FR SVC disabled, LAPF state down
  Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0
  Last input 00:00:20, output 00:00:17, output hang never
  Last clearing of "show interface" counters 01:55:59
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 16
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 15000 bits/sec, 15 packets/sec
  5 minute output rate 138000 bits/sec, 21 packets/sec
     18118 packets input, 5271538 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 20 giants, 0 throttles
     10837 input errors, 10837 CRC, 4069 frame, 1374 overrun, 0 ignored, 6727 abort
     26214 packets output, 16721111 bytes, 0 underruns
     0 output errors, 0 collisions, 45 interface resets
     0 output buffer failures, 0 output buffers swapped out
[+][-]12.19.2007 at 05:52AM PST, ID: 20499474

View this solution now by starting your 7-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zones: Network Routers, Networking Hardware
Tags: down, line, t1
Sign Up Now!
Solution Provided By: lrmoore
Participating Experts: 2
Solution Grade: A
 
 
[+][-]12.19.2007 at 11:37AM PST, ID: 20502156

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]12.19.2007 at 04:00PM PST, ID: 20504078

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]12.23.2007 at 10:23AM PST, ID: 20522196

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
 
Loading Advertisement...
20080716-EE-VQP-32 / EE_QW_2_20070628