Advertisement

03.19.2008 at 02:14AM PDT, ID: 23252958
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

7.8

cisco877 config problem [can ping outside interface but not isp end's ip]

Asked by stock99 in Network Routers, Broadband Internet

hi,

 I am trying to setup my cisco 877-m modem with my adsl1 connection. The isp i used is iinet and my ios is 12.4 . I am not sure what exactly i did wrong, as I can ping any site via 877's console connection. But when i connect a pc to one of the 4 ethernet port, my pc can't ping beyond the dialer1 interface. Did i do sth wrong with my nat configuration?

========my config==============


!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname fda-vv
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
crypto pki trustpoint TP-self-signed-2180413172
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-2180413172
 revocation-check none
 rsakeypair TP-self-signed-2180413172
!
!
crypto pki certificate chain TP-self-signed-2180413172
 certificate self-signed 01
  3082024F 308201B8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
  31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
  69666963 6174652D 32313830 34313331 3732301E 170D3032 30333031 30303333
  32395A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
  4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 31383034
  31333137 3230819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
  81009D93 716EB6BF EA2A4776 251B5E00 B80EA773 34D35337 9BD5DB00 90A7A326
  85C2C160 E4393924 A9239291 37CE8F88 95C2384E 45A5D2F5 15887EF4 47001FF0
  2F866EE5 FE2A5B8B F4F9C234 2D243B3C 7DC2EC99 E60DB734 7676FF90 43415330
  CF505F3D 467B5951 4F56E1FF 6140D2F1 517E89B3 F0310E82 B4447AA8 73E7888E
  47EB0203 010001A3 77307530 0F060355 1D130101 FF040530 030101FF 30220603
  551D1104 1B301982 17796F75 726E616D 652E796F 7572646F 6D61696E 2E636F6D
  301F0603 551D2304 18301680 143BB831 3371789E B897F70C 75821F3A 3D919BF0
  2A301D06 03551D0E 04160414 3BB83133 71789EB8 97F70C75 821F3A3D 919BF02A
  300D0609 2A864886 F70D0101 04050003 81810072 C7E13028 E9BC960E D7F883B5
  897BF5D6 8374F831 DD72BC13 BC306565 FB43F175 6EA4C436 D7B1FFCC 640B8D29
  18A748BB 558D3BA2 3AA737E7 A2D606A7 B2BF5DF7 50FA371A 68AE5CE9 01E50419
  EBBDB0D9 8C2FAB9D 327B0639 2782C712 E43968A3 5CEA4B92 7380A7C3 9BCFE334
  602976A0 A8154AD9 CA4020C2 5C88EB74 37B896
        quit
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool sdm-pool
   import all
   network 10.10.10.0 255.255.255.248
   default-router 10.10.10.1
   lease 0 2
!
!
no ip domain lookup
ip domain name yourdomain.com
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
multilink bundle-name authenticated
!
!
username cisco privilege 15 secret 5 $1$18nh$Vr78Ccd4QiyITmEU.MHj51
!
!
archive
 log config
  hidekeys
!
!
!
!
!
interface ATM0
 no ip address
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip route-cache flow
 no atm ilmi-keepalive
 dsl operating-mode auto
!
interface ATM0.1 point-to-point
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip mtu 1492
 no ip mroute-cache
 pvc 8/35
  encapsulation aal5mux ppp dialer
  dialer pool-member 1
 !
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
 description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
 ip address 10.10.10.1 255.255.255.248
 ip nat inside
 ip virtual-reassembly
 ip tcp adjust-mss 1452
!
interface Dialer1
 ip address negotiated
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip mtu 1492
 ip nbar protocol-discovery
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 dialer pool 1
 dialer idle-timeout 2147483
 dialer-group 1
 no cdp enable
 ppp authentication pap callin
 ppp chap hostname my_userName
 ppp chap password 0 my_passWord
 ppp pap sent-username my_userName password 0 my_passWord
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 100 interface Dialer1 overload
!
access-list 1 permit 10.0.0.0 0.0.0.255
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 100 permit ip 10.0.0.0 0.0.0.255 any
no cdp run
!
!
!
!
control-plane
!
banner login 
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege level of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use.

For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
-----------------------------------------------------------------------

!
line con 0
 login local
 no modem enable
line aux 0
line vty 0 4
 access-class 23 in
 privilege level 15
 login local
 transport input telnet ssh
!
scheduler max-task-time 5000
end


========end of config===========Start Free Trial
 
Loading Advertisement...
 
[+][-]03.19.2008 at 04:32AM PDT, ID: 21160312

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]03.19.2008 at 12:31PM PDT, ID: 21164999

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]03.22.2008 at 12:02AM PDT, ID: 21185038

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]03.25.2008 at 06:25PM PDT, ID: 21208036

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]03.31.2008 at 07:07PM PDT, ID: 21250723

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]04.03.2008 at 06:26AM PDT, ID: 21272356

View this solution now by starting your 7-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zones: Network Routers, Broadband Internet
Sign Up Now!
Solution Provided By: HiS_SlyneSS
Participating Experts: 1
Solution Grade: A
 
 
 
Loading Advertisement...
20080716-EE-VQP-32 / EE_QW_2_20070628