October 16, 2008 01:39pm pdt

06.30.2008 at 05:40AM PDT, ID: 23526635

	[x] Attachment Details

[x]

The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

The Grade of the Solution
The Zone Rank of the Expert Providing the Solution
The Number of Author and Expert Comments
The Number of Experts Contributing
The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

7.3

Cannot route packets between interfaces

Asked by elmdene in Network Routers

Tags: cisco, Router, 831

Hi,

This router is starting to annoy me, so as always, I've come to the experts for a hand.

I cannot ping the external port that I set up so I know I can't pass any traffic through it, so my question is, why can't I ping the external interface ?

Cheers
Si
Start Free Trial

         
           
             1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:

           
           
             !This is the running config of the router: 192.168.100.7
!----------------------------------------------------------------------------
!version 12.4
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname admin
!
boot-start-marker
boot-end-marker
!
no logging buffered
enable secret 5 $1$q7qd$E4I.dKcGvKJyjr3MBM6M/1
!
no aaa new-model
!
resource policy
!
!
!
ip cef
ip name-server 194.72.6.57
ip name-server 194.73.82.242
!
!
!
username admin privilege 15 secret 5 $1$Rf1u$3ytpy3AQcsnTo0aac2gyP1
!
! 
!
!
!
interface Ethernet0
 description An Interface$ETH-LAN$
 ip address 192.168.100.7 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 no ip mroute-cache
 no cdp enable
 hold-queue 32 in
!
interface Ethernet1
 description $ETH-WAN$
 ip address 81.143.153.18 255.255.255.240
 ip nat outside
 ip virtual-reassembly
 no ip mroute-cache
 duplex auto
 no cdp enable
!
interface Ethernet2
 no ip address
 shutdown
!
interface FastEthernet1
 duplex auto
 speed auto
!
interface FastEthernet2
 duplex auto
 speed auto
!
interface FastEthernet3
 duplex auto
 speed auto
!
interface FastEthernet4
 duplex auto
 speed auto
!
ip route 0.0.0.0 0.0.0.0 Ethernet1 permanent
ip http server
ip http access-class 23
ip http authentication local
no ip http secure-server
ip http max-connections 4
ip http timeout-policy idle 600 life 86400 requests 10000
!
ip nat inside source list 1 interface Ethernet1 overload
!
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 192.168.100.0 0.0.0.255
access-list 23 permit 192.168.100.0 0.0.0.255
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 102 remark SDM_ACL Category=16
access-list 102 permit ip 192.168.100.0 0.0.0.255 any
!
control-plane
!
!
line con 0
 exec-timeout 120 0
 login local
 no modem enable
 stopbits 1
line aux 0
line vty 0 4
 access-class 23 in
 exec-timeout 120 0
 login local
 length 0
!
scheduler max-task-time 5000
end

           
         

Keywords: Cannot route packets between interfaces

	Title
1	Basic Routing Question
2	Cisco Routing Issue
3	Route specific internet traffic out a spe…
4	Hostname Resolves but does not reply.
5	Can ping information be used to estimat…
6	Routing issue on point to point connection

Loading Advertisement...

20080924-EE-VQP-38 - Hierarchy / EE_QW_2_20070628

1. JFrederic... 410,885
2. lrmoore 358,238
3. donjohnston 262,668
4. RobWill 150,186
5. that1guy15 122,500
6. donmanrobb 115,755
7. batry_boy 106,786
8. from_exp 92,031
9. harbor235 85,690
10. giltjr 81,910
11. _jesper_ 79,225
12. Darr247 74,749
13. naughton 66,535
14. logic2 64,575
15. dpk_wal 59,602
16. uetian1707 58,934
17. kdearing 58,490
18. Pugglewu... 52,311
19. mikebernh... 51,085
20. ck459 48,985
21. rsivanandan 47,550
22. bfason 44,455
23. bkepford 43,750
24. Press2Esc 38,675
25. arnold 37,700

1. lrmoore 3,019,928
2. JFrederic... 1,371,196
3. donjohnston 1,129,089
4. mikebernh... 635,668
5. RobWill 365,475
6. rsivanandan 362,866
7. harbor235 308,141
8. Dr-IP 293,929
9. kbbcnet 200,499
10. batry_boy 196,196
11. giltjr 195,491
12. Scotty_ci... 186,404
13. calvinetter 180,631
14. pseudocy... 157,520
15. pjtemplin 152,803
16. that1guy15 139,625
17. td_miles 132,003
18. nodisco 121,942
19. grblades 118,484
20. _jesper_ 117,799
21. donmanrobb 115,755
22. bfason 115,355
23. pedrow 115,300
24. wingatesl 109,654
25. from_exp 109,049

Cannot route packets between interfaces

Asked by elmdene in Network Routers

Tags: cisco, Router, 831

About this solution