August 29, 2008 08:16pm pdt

Member Login

Hall of Fame

Yearly

1JFrederic... 307,255
2lrmoore 256,268
3donjohnston 228,768
4RobWill 136,261
5donmanrobb 109,475
6batry_boy 104,786
7that1guy15 95,075
8from_exp 83,631
9giltjr 75,410
10naughton 64,435
11logic2 55,282
12dpk_wal 54,852
13harbor235 53,440
14_jesper_ 52,800
15Darr247 50,369
16ck459 44,585
17uetian1707 41,530
18bfason 41,455
19rsivanandan 39,925
20Press2Esc 36,675
21arnold 35,700
22kdearing 34,740
23mikebernh... 34,305
24stuknhaw... 30,100
25MrHusy 29,600

	[x] Attachment Details

Cisco 2811 configuration issue

Zones: Network Routers, Voice Over IP, Network Switches & Hubs

Tags: Cisco, Integrated Service Router, Cisco 2811, NME-16ES-1G-P

Hello!,

Here is my situation. I have a cisco 2811 integrated service router with an nme-16es-1G-p service module installed at a brach office. I have two IP phones two pc's and a printer connected to the switch ports. My problem is that I cannot ping devices on the switch from the router. When connected to the Switch i.e. service-module gigabitethernet 1/0 session, I can ping devices connected to the switch but I cannot ping through to the router.

Thanks in advance!!!!!

         
           
             1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:
141:
142:
143:
144:
145:
146:
147:
148:
149:
150:
151:
152:
153:
154:
155:
156:
157:
158:
159:
160:
161:
162:
163:
164:
165:
166:
167:
168:
169:
170:
171:
172:
173:
174:
175:
176:
177:
178:
179:
180:
181:
182:
183:
184:
185:
186:
187:
188:
189:
190:
191:
192:
193:
194:
195:
196:
197:
198:
199:
200:
201:
202:
203:
204:
205:
206:
207:
208:
209:
210:
211:
212:
213:
214:
215:
216:
217:
218:
219:
220:
221:
222:
223:
224:

           
           
             Here is the router config and the nme-16es-1g-p switch config
 
Current configuration : 1249 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Union
!
boot-start-marker
boot-end-marker
!
logging buffered 52100 warnings
enable secret 5 ###########################
!
no aaa new-model
!
resource policy
!
no network-clock-participate wic 0 
ip subnet-zero
!
ip cef
!
!
!
username Administrator privilege 15 password 0 #######
!
!
controller T1 0/0/0
 framing esf
 linecode b8zs
 channel-group 0 timeslots 1-24
!
!
interface FastEthernet0/0
 no ip address
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 duplex auto
 speed auto
interface Serial0/0/0:0
 ip address 10.16.4.2 255.255.255.252
!
interface GigabitEthernet1/0
 ip address 172.16.4.1 255.255.255.0
!
router eigrp 20
 network 10.0.0.0
 network 172.16.0.0
 no auto-summary
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.16.4.1
ip route 172.16.4.0 255.255.255.0 172.16.4.2
!
ip http server
ip http authentication local
!
!
control-plane
!
!
line aux 0
line 66
 no activation-character
 no exec
 transport preferred none
 transport input all
 transport output all
line vty 0 4
 privilege level 15
 login local
 transport input telnet
!
scheduler allocate 20000 1000
!
end
 
Union#
 
Current configuration : 2468 bytes
!
! Last configuration change at 19:36:33 UTC Sat Jul 12 2008
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Switch-ES
!
!
no aaa new-model
switch 1 provision NME-16ES-1G-P
ip subnet-zero
ip routing
!
!
!
!
!
no file verify auto
!
spanning-tree mode rapid-pvst
spanning-tree extend system-id
spanning-tree vlan 50 priority 24576
!
vlan internal allocation policy ascending
!
interface Port-channel1
 switchport access vlan 50
 switchport trunk encapsulation dot1q
 switchport trunk allowed vlan 50
 switchport mode access
!
interface FastEthernet1/0/1
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/2
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/3
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/4
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/5
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/6
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/7
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/8
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/9
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/10
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/11
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/12
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/13
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/14
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/15
 switchport access vlan 50
 switchport mode access
!
interface FastEthernet1/0/16
 switchport access vlan 50
 switchport mode access
!
interface GigabitEthernet1/0/1
!
interface GigabitEthernet1/0/2
 no switchport
 ip address 172.16.20.2 255.255.255.0
!
interface Vlan1
 no ip address
 shutdown
!
interface Vlan10
 ip address 172.16.10.1 255.255.255.0
!
 interface Vlan50
 ip address 172.16.4.1 255.255.255.0
 ip helper-address 192.168.20.0
!
ip classless
ip route 0.0.0.0 0.0.0.0 172.16.20.1
ip http server
ip http secure-server
!
!
control-plane
!
!
line con 0
 exec-timeout 30 0
 password ############
line vty 0 4
 exec-timeout 30 0
 password ############
 login
line vty 5 15
 no login
!
!
end

           
         

Start your free trial to view this solution

[x]

The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

The Grade of the Solution
The Zone Rank of the Expert Providing the Solution
The Number of Author and Expert Comments
The Number of Experts Contributing
The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

9.8

Question Stats

Zone: Computer Hardware

Question Asked By: markdda

Solution Provided By: donjohnston

Participating Experts: 2

Solution Grade: A

Translate:

Loading Advertisement...

20080723-EE-VQP-34 / EE_QW_2_20070628