|
[x]
Posted via EE Mobile
|
||
Search, ask, and monitor your questions on the go with EE Mobile. Visit Experts Exchange from your mobile device and never be out of touch again. |
||
| 01/20/2009 at 01:50PM PST, ID: 24068473 |
|
[x]
Attachment Details
|
||
|
[x]
The Solution Rating System
|
||
With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.
Your Input Matters If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support. Thank you! |
||
1: 2: 3: 4: 5: 6: 7: 8: 9: 10: 11: 12: 13: 14: 15: 16: 17: 18: 19: 20: 21: 22: 23: 24: 25: 26: 27: 28: 29: 30: 31: 32: 33: 34: 35: 36: 37: 38: 39: 40: 41: 42: 43: 44: 45: 46: 47: 48: 49: 50: 51: 52: 53: 54: 55: 56: 57: 58: 59: 60: 61: 62: 63: 64: 65: 66: 67: 68: 69: 70: 71: 72: 73: 74: 75: 76: 77: 78: 79: 80: 81: 82: 83: 84: 85: 86: 87: 88: 89: 90: 91: 92: 93: 94: 95: 96: 97: 98: 99: 100: 101: 102: 103: 104: 105: 106: 107: 108: 109: 110: 111: 112: 113: 114: 115: 116: 117: 118: 119: 120: 121: 122: 123: 124: 125: 126: 127: 128: 129: 130: 131: 132: 133: 134: 135: 136: 137: 138: 139: 140: 141: 142: 143: 144: 145: 146: 147: 148: 149: 150: 151: 152: 153: 154: 155: 156: 157: 158: 159: 160: 161: 162: 163: 164: 165: 166: 167: 168: 169: 170: 171: 172: 173: 174: 175: 176: 177: 178: 179: 180: 181: 182: 183: 184: 185: 186: 187: 188: 189: 190: 191: 192: 193: 194: 195: 196: 197: 198: 199: 200: 201: 202: 203: 204: 205: 206: 207: 208: 209: 210: 211: 212: 213: 214: 215: 216: 217: 218: 219: 220: 221: 222: 223: 224: 225: 226: 227: 228: 229: 230: 231: 232: 233: 234: 235: 236: 237: 238: 239: 240: 241: 242: 243: 244: 245: 246: 247: |
=== Flushing messages (20:50:41 UTC Tue Jan 20 2009) ===
Buffered messages:
Queued messages:
*Jan 20 20:50:41.395: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Jan 20 20:50:18.647: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Jan 20 20:50:18.651: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Jan 20 20:50:27.603: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Jan 20 20:50:27.603: %LINK-3-UPDOWN: Interface FastEthernet1, changed state to up
*Jan 20 20:50:28.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Jan 20 20:50:28.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1, changed state to down
*Jan 20 20:50:29.619: USB init complete.
*Jan 20 20:50:32.375: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
*Jan 20 20:50:32.383: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down
*Jan 20 20:50:34.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Jan 20 20:50:38.627: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Jan 20 20:50:40.423: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, changed state to up
No warm reboot Storage
*** System received a SegV exception ***
signal= 0xb, code= 0x1400, context= 0x830e79e0
PC = 0x821aee18, Vector = 0x1400, SP = 0x835eed40
System Bootstrap, Version 12.3(8r)YH8, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
C1800 platform with 131072 Kbytes of main memory with parity disabled
Upgrade ROMMON initialized
program load complete, entry point: 0x80012000, size: 0xc0c0
Initializing ATA monitor library.......
program load complete, entry point: 0x80012000, size: 0xc0c0
Initializing ATA monitor library.......
program load complete, entry point: 0x80012000, size: 0x135fd9c
Self decompressing the image : ################################################################################################################################################## [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C181X Software (C181X-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 18-Jul-07 04:07 by prod_rel_team
Image text-base: 0x80012118, data-base: 0x821C0000
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Installed image archive
Cisco 1811 (MPC8500) processor (revision 0x400) with 118784K/12288K bytes of memory.
Processor board ID FTX1122W0QW, with hardware revision 0000
10 FastEthernet interfaces
1 Serial interface
1 terminal line
31488K bytes of ATA CompactFlash (Read/Write)
20:51:37 UTC Tue Jan 20 2009: Unexpected exception to CPU: vector 1400, PC = 0x821AEE18, LR = 0x81234574
-Traceback= 0x821AEE18 0x81234574 0x81234714 0x812347F4 0x8123A2E0 0x81217474 0x8122328C 0x80CCEE40 0x80CCF7E0 0x80DF2418 0x809234EC 0x80945A6C 0x80945EA8 0x80C77340 0x80C718F0 0x80C69EFC
CPU Register Context:
MSR = 0x00029220 CR = 0x44888088 CTR = 0x00000000 XER = 0x20000000
R0 = 0x00000006 R1 = 0x835EED40 R2 = 0xFFE9FCC8 R3 = 0x00000000
R4 = 0x00000000 R5 = 0x835EED7C R6 = 0x00000001 R7 = 0x0000003E
R8 = 0x82530220 R9 = 0x0A04C814 R10 = 0x00000000 R11 = 0x84C33024
R12 = 0x24888088 R13 = 0xFFEA1560 R14 = 0x00000000 R15 = 0x00000000
R16 = 0x00000000 R17 = 0x00000000 R18 = 0x82E90000 R19 = 0x00000000
R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000
R24 = 0x00000001 R25 = 0x0A04C814 R26 = 0x835EED7C R27 = 0x00000000
R28 = 0x835EED98 R29 = 0x835EED78 R30 = 0x835EED98 R31 = 0x00000006
Free space check for flash:crashinfo_20090120-205137 failed (8192/15694)
Free space check for flash:crashinfo_20090120-205137 failed (8192/15694)
Free space check for flash:crashinfo_20090120-205137 failed (8192/15694)
=== Flushing messages (20:51:37 UTC Tue Jan 20 2009) ===
Buffered messages:
Queued messages:
*Jan 20 20:51:37.371: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Jan 20 20:51:14.647: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Jan 20 20:51:14.651: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Jan 20 20:51:23.607: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Jan 20 20:51:23.607: %LINK-3-UPDOWN: Interface FastEthernet1, changed state to up
*Jan 20 20:51:24.607: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Jan 20 20:51:24.607: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1, changed state to down
*Jan 20 20:51:25.623: USB init complete.
*Jan 20 20:51:28.375: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
*Jan 20 20:51:28.387: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down
*Jan 20 20:51:30.647: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Jan 20 20:51:34.611: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Jan 20 20:51:36.399: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, changed state to up
No warm reboot Storage
*** System received a SegV exception ***
signal= 0xb, code= 0x1400, context= 0x830e79e0
PC = 0x821aee18, Vector = 0x1400, SP = 0x835eed40
System Bootstrap, Version 12.3(8r)YH8, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
C1800 platform with 131072 Kbytes of main memory with parity disabled
Upgrade ROMMON initialized
program load complete, entry point: 0x80012000, size: 0xc0c0
Initializing ATA monitor library.......
program load complete, entry point: 0x80012000, size: 0xc0c0
Initializing ATA monitor library.......
program load complete, entry point: 0x80012000, size: 0x135fd9c
Self decompressing the image : ################################################################################################################################################## [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C181X Software (C181X-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 18-Jul-07 04:07 by prod_rel_team
Image text-base: 0x80012118, data-base: 0x821C0000
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Installed image archive
Cisco 1811 (MPC8500) processor (revision 0x400) with 118784K/12288K bytes of memory.
Processor board ID FTX1122W0QW, with hardware revision 0000
10 FastEthernet interfaces
1 Serial interface
1 terminal line
31488K bytes of ATA CompactFlash (Read/Write)
20:52:33 UTC Tue Jan 20 2009: Unexpected exception to CPU: vector 1400, PC = 0x821AEE18, LR = 0x81234574
-Traceback= 0x821AEE18 0x81234574 0x81234714 0x812347F4 0x8123A2E0 0x81217474 0x8122328C 0x80CCEE40 0x80CCF7E0 0x80DF2418 0x809234EC 0x80945A6C 0x80945EA8 0x80C77340 0x80C718F0 0x80C69EFC
CPU Register Context:
MSR = 0x00029220 CR = 0x44888088 CTR = 0x00000000 XER = 0x20000000
R0 = 0x00000006 R1 = 0x835EED40 R2 = 0xFFE9FCC8 R3 = 0x00000000
R4 = 0x00000000 R5 = 0x835EED7C R6 = 0x00000001 R7 = 0x0000003E
R8 = 0x82530220 R9 = 0x0A04C814 R10 = 0x00000000 R11 = 0x84C31F68
R12 = 0x24888088 R13 = 0xFFEA1560 R14 = 0x00000000 R15 = 0x00000000
R16 = 0x00000000 R17 = 0x00000000 R18 = 0x82E90000 R19 = 0x00000000
R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000
R24 = 0x00000001 R25 = 0x0A04C814 R26 = 0x835EED7C R27 = 0x00000000
R28 = 0x835EED98 R29 = 0x835EED78 R30 = 0x835EED98 R31 = 0x00000006
Free space check for flash:crashinfo_20090120-205233 failed (8192/15694)
Free space check for flash:crashinfo_20090120-205233 failed (8192/15694)
Free space check for flash:crashinfo_20090120-205233 failed (8192/15694)
=== Flushing messages (20:52:33 UTC Tue Jan 20 2009) ===
Buffered messages:
Queued messages:
*Jan 20 20:52:33.291: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Jan 20 20:52:10.643: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Jan 20 20:52:10.647: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Jan 20 20:52:19.607: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Jan 20 20:52:19.607: %LINK-3-UPDOWN: Interface FastEthernet1, changed state to up
*Jan 20 20:52:20.607: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Jan 20 20:52:20.607: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1, changed state to down
*Jan 20 20:52:21.603: USB init complete.
*Jan 20 20:52:24.359: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
*Jan 20 20:52:24.367: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down
*Jan 20 20:52:26.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Jan 20 20:52:30.691: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Jan 20 20:52:32.319: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, changed state to up
No warm reboot Storage
*** System received a SegV exception ***
signal= 0xb, code= 0x1400, context= 0x830e79e0
PC = 0x821aee18, Vector = 0x1400, SP = 0x835eed40
System Bootstrap, Version 12.3(8r)YH8, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
C1800 platform with 131072 Kbytes of main memory with parity disabled
Upgrade ROMMON initialized
program load complete, entry point: 0x80012000, size: 0xc0c0
Initializing ATA monitor library.......
program load complete, entry point: 0x80012000, size: 0xc0c0
Initializing ATA monitor library.......
|
Advertisement