Thanks for the attempt at helping. Since I basically did not receive any definitive responses, I am hiring a Cisco Consultant to set this up for me.
Main Topics
Browse All TopicsI have a 5 site VPN setup with a VPN Concentrator 3000 at the Main SIte and PIX 506e at each of the 4 remote sites. We have been using this setup for 6 years with no issues.
Now, I need to allow 1 server at the main site to communicate outbound via the Concentrator instead of through the normal default gateway. It will need http and ftp capabilities.
When I change the default gateway to the address of the Concentrator and then do a tracert, it is stopping at the Concentrator.
What settings to I need to change to allow this Server to have outbound communications?
This Question has been solved and asker verified All Experts Exchange premium technology solutions are available to subscription members.
Experts Exchange has been collecting answers to technology questions since 1996…3 million and counting! If you have a question, chances are we already have your answer.
If you can't find the exact answer you're looking for, ask our exclusive community of 50,000 experts. You’ll get a personalized answer from a trusted professional.
Thousands of free tech tips, tricks, how-to’s and tutorials are available in our peer reviewed articles section. See for yourself how smart our experts are, no login required.
Access the answers to your technology questions today.
30-day free trial. Register in 60 seconds.
Members of the expert community talk about why the experience at Experts Exchange is different than what you will find anywhere else.

Try it out and discover for yourself.
30-day free trial. Register in 60 seconds.
Join the community of experts here and help other tech pros by answering question in your area of expertise. You can earn FREE access to all Experts Exchange's premium features and resources.
Business Accounts
Answer for Membership
by: giltjrPosted on 2009-06-19 at 04:59:44ID: 24665519
Have you setup outbound NAT? I have a 3020 and if you go to Configuration, Policy Managment, Traffic Management, there is a NAT.
I believe you would need define a Interface NAT Rule.
I have NEVER done this and so doing this could break something.