Looks like you haven't created your NAT policy.
Here is a quick doc that can help you with that:
http://www.cisco.com/en/US
Main Topics
Browse All Topicsi have a Cisco router 2811, i have configured the router by having one LAN connection and two WAN connections.
i reset the router and now i am unable to route out traffic to the internet, i have used SDM to configure the router. i have attached the running config so you can see the what i have done!
presently i only have one connection plugged in, an interface test on the active WAN connection show a successful test, but if i test the internal LAN conection, it fails stating a exit route interface error.
This Question has been solved and asker verified All Experts Exchange premium technology solutions are available to subscription members.
Experts Exchange has been collecting answers to technology questions since 1996…3 million and counting! If you have a question, chances are we already have your answer.
If you can't find the exact answer you're looking for, ask our exclusive community of 50,000 experts. You’ll get a personalized answer from a trusted professional.
Thousands of free tech tips, tricks, how-to’s and tutorials are available in our peer reviewed articles section. See for yourself how smart our experts are, no login required.
Access the answers to your technology questions today.
30-day free trial. Register in 60 seconds.
Members of the expert community talk about why the experience at Experts Exchange is different than what you will find anywhere else.

Try it out and discover for yourself.
30-day free trial. Register in 60 seconds.
Join the community of experts here and help other tech pros by answering question in your area of expertise. You can earn FREE access to all Experts Exchange's premium features and resources.
Looks like you haven't created your NAT policy.
Here is a quick doc that can help you with that:
http://www.cisco.com/en/US
Business Accounts
Answer for Membership
by: ikalmarPosted on 2009-10-28 at 11:12:41ID: 25686410
Hi,
You configured this:
interface FastEthernet0/0/0
description $ETH-WAN$$FW_OUTSIDE$
ip address 62.138.x.26 255.255.255.252
ip access-group 1 out
!
logging trap debugging
access-list 1 remark HTTP Access-class list
access-list 1 remark SDM_ACL Category=1
access-list 1 permit 192.168.x.0 0.0.0.255
access-list 1 deny any
and this acl denies all packets, please fintetuning it or remove ' ip access-group 1 out'