I am having trouble connecting to my routers home page. I had a problem before and was advised to go to the home page (192.168.2.1) and utilise the 'use as access point' function. I tried this...
What is the default password for a 2Wire DSL router from SBC? Thanks.
I formated my laptop and setup my wireless network card to realize that I don't remember the WEP codes anymore. So then I went to login into my router (NetGear FWAG114) and I can't remember t...
I get this message about 1 of 5 times from any site. Most often a retry will bring up the site on the second attempt but rarely, I cannot get to the site at that time. Sometimes the "Retry" bu...
Here is the setup.
We have a DSL connection with 1 Static IP address and are using a Linksys RVS4000 VPN Router. The router is working great as far as DSL connectivity and we have been abl...
Hi again,
I have two Cisco switches, a 2950 and a 2900. I have been trying to configure them using tftp to update the IOS and text files to set up VLANs, Trunk ports etc.
I did the eras...
Hi, I'm currently using a NETGEAR Wireless Router Model MR314 and Wireless Adapter MA301. (802.11b) I'm not very well-versed in computers. I can't host Warcraft 3 games because of my router (w...
Everytime I access the Security area, it prompt me for the Level 15 access password. For Cisco device, the standard username and passworf is 'cisco' and 'Cisco'. How about the level 15 access?...
hi
how i can change password for
1- cisco switch
2- cisco router
3- pix firewall
thanks
We have a Cisco ASA 5510 that we are trying to set-up in a new envrionment. We used the management tool to "restore the device to a factory default config" however now the previous username /...
I need to enable port forwarding on 2wire router (2700HG-B), (port 80), but don't know the exact details.
I am installing Panasonic wireless remote monitoring camera. I need to register a p...
I have a router CISCO 871 (4 fe ports and 1 wan port) and I want to configure new VLANs. I have this configuration in my router:
...
!
interface FastEthernet0
!
interface FastEthernet1
!...
I was changing the shared key in my router settings. In the middle of saving, the power went out (imagine that timing!). Needless to say I had to reset the router. I can access router, usernam...
I keep getting ports on several Cisco 2950 switches that will go into ERR-DIS mode and not come out.
It seems to be random.
Each port is directly connected to a computer running Windows ...
I have a brand new NetScreen 5GT that I am trying to configure and am looking for help. I have never configured one of these before, though I know about other routers.
I am trying to accom...
I have a client with a BIG house. There is network cable run to all points of the house (good news). But they also want to have wireless thru the house. I installed a routers and purchase two ...
Hi,
late last night a vital router lost its configuration. I have been trying to learn cisco in a well short space of time but its just not that simple. The router boots up in rommon only...
I have a cisco router with a public and private subnet on the Ethernet side of the device. we had to add some ACL's to help control some bandwidth problems but now for some reason all traffic...
I'm having an infrequent issue with my wireless adapter being able to connect as "local only" and "unidentified network" - the result is no Internet. As I have an XP box that uses the same ro...
I am getting a few crc/frame errros per minute on my serial interface of my cisco router. I have called the ISP and they have done several tests and some have provided errors to the smjk and ...
Several of my company's staff are at a trade show and trying to access our corporate network using VPN. We use Cisco VPN client on all of our laptops and we have a Cisco PIX at our HQ offices...
Hi Experts,
Bit of a change of topic from my previous questions here. I have a D-Link 524 router, working well to share my broadband connection but I havent managed to get it setup for a pr...
Hi,
I am trying to map a local drive to a WAN server using Windows file sharing. I can not use VPN as I am on win XP 64-bit and cisco does not have a 64-bit vpn client. I must mount the drive...
Ref Question: http://www.experts-exchange.com/Hardware/Routers/Q_21555336.html
I am trying to put port security on a port, I want it to shutdown if another computer gets plugged into that p...
I need some new 3COM Visio stencils. Anyone know where I can find them?
