I'm trying to interpret the output from a "show log" on my Cisco 1760 router. I'm trying to pinpoint exactly when my T1 went down, but I'm getting weird labels for the date/time.
7w2d: %CO...
Hello,
We have a very wierd issue going on with a previously fine working WIndows XP Pro SP2 machine. This system is having a particular problem in which Microsoft Office Word/Excel files a...
I am getting a few crc/frame errros per minute on my serial interface of my cisco router. I have called the ISP and they have done several tests and some have provided errors to the smjk and ...
Hello all:
I'll list my hardware stuff first:
MacBook with OS X 10.4.
Cisco Router 1710
The blue serial console cable w/ a usb-serial tripplite adapter (i installed the drivers on the Mac...
I have a Cisco 871 router that I've been trying to setup for about 5 hours now with no luck. I've read everywhere I could find on the net for instructions. I've used the gui interface, the IOS...
While trying to find a solution to a packet loss problem we are getting with our internet connection our ISP has asked us to change the MTU packet size on our router from the default value of ...
Our building is in the process of getting a fiber circuit pulled in from the street.
We are being told, that in order to connect our CAT5 ethernet equipment to the fiber from the street, a fi...
I am trying to stand up a new dialup router. I have a T1 connected to my controller card. after i made some configuration I get the following on the S 1/0:23 interface:
show int s 1/0:23
S...
hi guys
facing a problem ...and its very strange ...
i would like you to show how i can do that ...
at ist please see my out put from SH FLASH
Router#SH FLAsh
System flash direc...
I have 2 ASA 5510's
One is setup with 6 VPNs, users, ACL etc.. The other one is brand new.
I want to setup fail over for both the the ASA.
1. If the ASA-1 has a hardware failure then ...
I have a brand new NetScreen 5GT that I am trying to configure and am looking for help. I have never configured one of these before, though I know about other routers.
I am trying to accom...
I accidentally remove the enable password for the level 15 privelege on a cisco 2620 router. When i try to type the enable command on the HO> prompt, i get the message saying "No Password Set....
I have a linksys router that I use to split the internet connection onto 4 computers.... however, one computer, running Windows XP (my sister) is using up our bandwidth limit for the month......
Hello
I have a Cisco 1801 K9 router with the security enabled IOS.
It has 1 fastethernet0 interface, 1 ATM interface for DSL connection, and 8 fastethernet ports numbered from 1 to 8. Can ...
Hi All,
In my CISCO switch i have created 4 VLAN's.
Default VLAN showing UO and rest showing up but line protocol down.
Config is here
Using 2893 out of 524288 bytes
!
version 12.2
...
I have become locked out of a Fortigate 100A. I can attach via Hyper Terminal but I can not log in. Is there a way to reset it to the factory default?
I recently moved my modem and router to another location in my apartment. I have 2 laptops and an XBOX 360. Before the move, all 3 of these devices would work at the same time. My router is...
I forgot my password for my Linksys SRW224G4 managed switch. How do I reset the device?
I am trying to install a Cisco Asa 5505. Connection: Cable Modem-->ASA-->Netgear WGR614.
From the ASA I am able to ping our internal network connections but there is no Internet connectio...
I have a static IP adress at home, and have set up a domainname (www.domainname.com) pointing to it. I need the router to forward all requests on port 80 to my local webserver.
I have troub...
I am unable to reset my router to factory defaults using the instructions here:
http://www.cisco.com/en/US/products/hw/routers/ps221/products_password_recovery09186a0080094773.shtml
Step 4...
Hi.
I have a Catalyst ws-c2924-xl-en that I have getting the current error when trying to load the Flash. I have formatted the Flash, xmodemed and copied the c2900XL-hs-mz-112.8.11-SA6 file f...
Hello all,
I have a cisco router with a public IP and i want it to server as an NTP server on my network
I have configured NTP on my cisco router but it looks like it's not updating so i nee...
I have a brand new CISCO 2811 router, I have configured hostname enable secret, FastEther0/0 and other basic configuration.
I also have (2) 2 port T1 WICs installed in the router, giving ...
Could anyone tell me the exact defference between an RJ11 and a RJ12 plug?
We have got an issue connecting stores to a WAN and believe that we have a problem with connecting the splitter.
...
